ABBOTT 22
Description
L.W.L.: 18" 9" (5.72 m) Beam: 7' 6" (2.29 m) Draft: 3' 10" (1.17 m) Displacement: 3100 lbs. (1407 kg.) Ballast: 1550 lbs. (704 kg.)
Construction Details
| Designer | W. Abbott |
|---|---|
| Length | 22.000 ft |
| LOA | 22.000 ft |
| LWL | 18.750 ft |
| Beam | 7.500 ft |
| Displacement | 3100 lb |
| Max Draft | 3.830 ft |
The standard boat dimensions
| i | 28 ft |
|---|---|
| j | 9.75 ft |
| p | 23.50 ft |
| e | 8 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 28 ft | 9.75 ft | 23.50 ft | 8 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | SPINNAKER |
|---|---|
| Luff | * 28.17 ft - (8586 mm) |
| MidGirth | * 17.55 ft - (5349 mm) |
| Foot | * 17.55 ft - (5349 mm) |
| Perc LP | * 180 |
| Area | * 420 ft² |
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 23.5 ft - (7163 mm) |
| Foot | * 8 ft - (2438 mm) |
| Leech-AftHdBd | * 24.33 ft - (7416 mm) |
| Tack Ang | * 88.01 ° |
| Diag (clew/head) | * 24.56 ft - (7486 mm) |
| Head (inches) | * 3.5 in |
| Area (no Roach) | * 96.13 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | 23.72 ft - (7230 mm) |
| Foot | * 13.1 ft - (3993 mm) |
| Leech | * 20.31 ft - (6190 mm) |
| Percentage LP | * 114.97 % |
| Length Perpendicular | * 11.21 ft - (3417 mm) |
| Deck Angle | * 11.98 ° |
| Area | * 132.92 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | 28.17 ft - (8586 mm) |
| Foot | * 15.91 ft - (4849 mm) |
| Leech | * 26.33 ft - (8025 mm) |
| Percentage LP | * 149.95 % |
| Length Perpendicular | * 14.62 ft - (4456 mm) |
| Deck Angle | * 4.02 ° |
| Area | * 205.94 ft² |
| Sail Type | ASYMMETRICAL |
|---|---|
| Luff | 29 ft - (8839 mm) |
| Foot | 17 ft - (5182 mm) |
| Leech | 26.5 ft - (8077 mm) |
| Perc LP | * 165 |
| Area | * 370 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.