Sabot (U S, Naples, Win'ard)
Description
Win'ard currently in production by Catalina Yachts as US Sabot. Naples is built by Shock -- has a lee board instead of a centerboard but sail is the same.
The standard boat dimensions
| i | - |
|---|---|
| j | - |
| p | 10.83 ft |
| e | 7 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| - | - | 10.83 ft | 7 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | MAINSAIL |
|---|---|
| Luff | 10.83 ft - (3301 mm) |
| Foot | 7 ft - (2134 mm) |
| Leech-AftHdBd | 11.916 ft - (3632 mm) |
| Tack Ang | * 88 ° |
| Diag (clew/head) | * 11.916 ft - (3632 mm) |
| Area (no Roach) | * 42.07 ft² |
| Comments |
Sleeve on luff slides down over the mast. Measurements of sleeve laid flat (Cross Measurements): 2 3/4-inch maximum at top -- 4-inch maximum at 1/2 height -- 4 1/4-inch maximum at bottom. Sleeve shall be 1 1/2-inches maximum vertically above head of sail. Two 12-inch battens on the leech. One 12-inch batten on the foot. |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.