S2 7.0 Meter
Description
The S2 7.0 (also known as the S2 7.0 Meter) is an American trailerable sailboat designed by Arthur Edmunds as a compact cruiser, built by S2 Yachts in Holland, Michigan; it was introduced in 1975 and produced through the late 1970s or early 1980s, with approximately 140 units constructed as one of the early models in S2's lineup emphasizing solid fiberglass construction, trailerability, and family-friendly cruising rather than high-performance racing. The fiberglass monohull features a masthead sloop rig, keel/centerboard configuration for shallow draft versatility when trailering or gunkholing, transom-hung rudder, and a practical interior with berths for four (V-berth forward, convertible settees in the saloon), small galley area, enclosed head compartment, and adequate storage, making it suitable for daysailing, weekend cruising, or light coastal use; owners appreciate its sturdy build quality, easy handling, stability from the ballast and moderate displacement, and classic lines with a reputation for reliability and good light-air performance from its generous sail area.
Construction Details
| Designer | Arthur Edmunds |
|---|---|
| Builder | S2 Yachts (Holland, MI) |
| Length | 23.000 ft |
| LOA | 23.000 ft |
| LWL | 18.330 ft |
| Beam | 8.000 ft |
| Displacement | 3800 lb |
| Ballast | 1300 lb |
| Max Draft | 4.670 ft |
| Min Draft | 2.200 ft |
| Year Built | 1975 |
The standard boat dimensions
| i | 28 ft |
|---|---|
| j | 10.20 ft |
| p | 24 ft |
| e | 8 ft |
| p2 | - |
| e2 | - |
| i2 | - |
| j2 | - |
| I | J | P | E | P2 | E2 | I2 | J2 |
|---|---|---|---|---|---|---|---|
| 28 ft | 10.20 ft | 24 ft | 8 ft | - | - | - | - |
Documents
Sails
S2 7.0 Meter - MAINSAIL
| Luff | * 24 ft - (7315 mm) |
|---|---|
| Foot | * 8 ft - (2438 mm) |
| Leech | * 24.94 ft - (7602 mm) |
| Tack Angle | * 87.99 ° |
| Diagonal | * 25.03 ft - (7629 mm) |
| Head (inches) | * 3.5 in - (89 mm) |
| Area | 95.89 ft² |
| Edit in Calculator |
S2 7.0 Meter - JIBSAIL
| Luff | * 23.84 ft - (7266 mm) |
|---|---|
| Foot | * 13.83 ft - (4215 mm) |
| Leech | * 20.25 ft - (6172 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 11.73 ft - (3575 mm) |
| Deck Angle | * 12 ° |
| Area | 139.79 ft² |
| Edit in Calculator |
S2 7.0 Meter - GENOA
| Luff | * 28.31 ft - (8629 mm) |
|---|---|
| Foot | * 16.75 ft - (5105 mm) |
| Leech | * 26.38 ft - (8041 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 15.3 ft - (4663 mm) |
| Deck Angle | * 4 ° |
| Area | 216.56 ft² |
| Edit in Calculator |
S2 7.0 Meter - SPINNAKER
| Stays | * 28.31 ft - (8629 mm) |
|---|---|
| MidGirth | * 18.36 ft - (5596 mm) |
| Foot | * 18.36 ft - (5596 mm) |
| Perc LP | * 180 % |
| Area | 441.81 ft² |
| Edit in Calculator |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.
Comments
