Yankee 24 Seahorse
Description
LWL 20' Beam 7'10.75" Draft (Bd Up) 1'8" Draft (Bd Down) 4'8"
The standard boat dimensions
| i | 28.50 ft |
|---|---|
| j | 10 ft |
| p | 24 ft |
| e | 9 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 28.50 ft | 10 ft | 24 ft | 9 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 24 ft - (7315 mm) |
| Foot | * 9 ft - (2743 mm) |
| Leech-AftHdBd | * 25.1 ft - (7650 mm) |
| Tack Ang | * 88 ° |
| Diag (clew/head) | * 25.34 ft - (7724 mm) |
| Head (inches) | * 4 in |
| Area (no Roach) | * 110.86 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | * 24.16 ft - (7364 mm) |
| Foot | * 13.46 ft - (4103 mm) |
| Leech | * 20.66 ft - (6297 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 11.5 ft - (3505 mm) |
| Deck Angle | * 11.98 ° |
| Area | * 138.91 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | * 28.69 ft - (8745 mm) |
| Foot | * 16.34 ft - (4980 mm) |
| Leech | * 26.8 ft - (8169 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 15 ft - (4572 mm) |
| Deck Angle | * 4.03 ° |
| Area | * 215.17 ft² |
| Sail Type | ASYMMETRICAL |
|---|---|
| Luff | * 28.69 ft - (8745 mm) |
| Foot | * 16.5 ft - (5029 mm) |
| Leech | * 26.39 ft - (8044 mm) |
| Perc LP | * 165 % |
| Area | * 355 ft² |
| Sail Type | SPINNAKER |
|---|---|
| Stays | * 28.69 ft - (8745 mm) |
| MidGirth | * 18 ft - (5486 mm) |
| Foot | * 18 ft - (5486 mm) |
| Perc LP | * 180 % |
| Area | * 439 ft² |
| Sail Type | STORMJIB |
|---|---|
| Luff | * 16.61 ft - (5063 mm) |
| Foot | * 7.65 ft - (2332 mm) |
| Leech | * 13.3 ft - (4054 mm) |
| Perc LP | * 60 % |
| Length Perp | * 6 ft - (1829 mm) |
| Deck Angle | * 18.97 ° |
| Area | * 49.86 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.