Swan 51 (Frers)
Description
The SWAN 51 (FRERS) is a performance cruiser. This substantial yacht offers spacious accommodations and excellent seakeeping, Her generous sail plan delivers excellent light-air performance. A true blue water cruiser capable of comfortable ocean passages.
Construction Details
| Designer | Unknown |
|---|---|
| Length | 51.000 ft |
| LOA | 40.250 ft |
| LWL | 32.430 ft |
| Beam | 12.920 ft |
| Displacement | 19400 lb |
| Max Draft | 7.040 ft |
The standard boat dimensions
| i | 69.50 ft |
|---|---|
| j | 20.87 ft |
| p | 62.73 ft |
| e | 18.05 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 69.50 ft | 20.87 ft | 62.73 ft | 18.05 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | GENOA |
|---|---|
| Luff | * 68.94 ft - (21013 mm) |
| Foot | * 33.47 ft - (10202 mm) |
| Leech | * 65.12 ft - (19849 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 31.31 ft - (9543 mm) |
| Deck Angle | * 4 ° |
| Area | 1079.13 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | * 58.05 ft - (17694 mm) |
| Foot | * 27.37 ft - (8342 mm) |
| Leech | * 50.91 ft - (15517 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 24 ft - (7315 mm) |
| Deck Angle | * 12 ° |
| Area | 696.67 ft² |
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 62.73 ft - (19120 mm) |
| Foot | * 18.05 ft - (5502 mm) |
| Leech-AftHdBd | * 64.53 ft - (19669 mm) |
| Tack Ang | * 88.01 ° |
| Diag (clew/head) | * 64.67 ft - (19711 mm) |
| Head (inches) | * 6 in |
| Area (no Roach) | 565.62 ft² |
| Sail Type | SPINNAKER |
|---|---|
| Stays | * 68.94 |
| MidGirth | * 37.57 ft - (11451 mm) |
| Foot | * 37.57 ft - (11451 mm) |
| Perc LP | * 180 |
| Area | 2201.56 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.