South Coast 21

South Coast 21

Description

The South Coast 21 is an American 21-foot trailerable fractional sloop designed by Carl Alberg as a daysailer and first built in 1965 by South Coast Seacraft Co. (Shreveport, Louisiana). Production continued until around 1979, with approximately 300 boats completed in fiberglass construction. It was developed during the rise of affordable trailerable sailboats, sharing the builder’s early focus on Alberg designs (the company later pivoted to the more successful South Coast 22 swing-keel variant). Minor changes occurred during the run, including moving the fixed keel a few inches aft on hulls numbered above 90 for improved balance. An active one-design racing fleet persists today, notably on Lake Travis near Austin, Texas, with examples also sailed on other inland waters and coastal areas. Key features include a slim, relatively speedy hull for its era, simple fractional rig, fixed keel with 3 ft draft, and basic daysailer accommodations—emphasizing easy trailering, launching, and fun performance for club racing or family outings rather than extended cruising. It is described as responsive and stable for its size, though with modest accommodations typical of 1960s pocket racers/daysailers.

Construction Details

Designer Carl Alberg
Builder South Coast Seacraft Co. (USA)
Length 21.330 ft
LOA 21.330 ft
LWL 14.330 ft
Beam 6.920 ft
Displacement 2000 lb
Max Draft 3.000 ft
Year Built 1965
Request A Sail Quote

The standard boat dimensions

i 22 ft
j 7.08 ft
p 24 ft
e 10.50 ft
p2 -
e2 -
i2 -
j2 -

Blueprints

Sails

South Coast 21 - MAINSAIL

Luff 24 ft - (7315 mm)
Foot 10.5 ft - (3200 mm)
Leech * 25.65 ft - (7818 mm)
Tack Angle * 88 °
Diagonal * 25.86 ft - (7882 mm)
Head (inches) * 4.5 in - (114 mm)
Area * 129.92 ft²
Edit in Calculator

South Coast 21 - JIBSAIL

Luff 20 ft - (6096 mm)
Foot 7.5 ft - (2286 mm)
Leech 17.33 ft - (5282 mm)
Percentage LP * 90.54 %
Length Perpendicular * 6.41 ft - (1954 mm)
Deck Angle * 13.48 °
Area * 64.07 ft²
Edit in Calculator

South Coast 21 - GENOA

Luff 20 ft - (6096 mm)
Foot 12 ft - (3658 mm)
Leech 19 ft - (5791 mm)
Percentage LP * 156.64 %
Length Perpendicular * 11.09 ft - (3380 mm)
Deck Angle * 4.57 °
Area * 110.94 ft²
Edit in Calculator

South Coast 21 - ASYMMETRICAL

Luff * 21.96 ft - (6693 mm)
Foot * 11.68 ft - (3560 mm)
Leech * 20.2 ft - (6157 mm)
Perc LP * 165 %
Area * 192 ft²
Edit in Calculator

South Coast 21 - SPINNAKER

Stays 22 ft - (6706 mm)
MidGirth 14 ft - (4267 mm)
Foot 14 ft - (4267 mm)
Perc LP * 180 %
Area * 262 ft²
Edit in Calculator

Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.

Comments

Portable hotknife

© 2025 Good Old Boat, Inc. All rights reserved