SO-DU-IT
Description
The SO-DU-IT is a sailboat designed by Ted Brewer. It has a unique rig with a forward angling mast that starts on the stern and is supported by struts. The mast connects to the bow with a forestay and is set up to have only one sail, a furling genoa. Information on the specification of the boat are not readily available as it was a customer specific design.
The standard boat dimensions
| i | 22.42 ft |
|---|---|
| j | 6.33 ft |
| p | - |
| e | - |
| p2 | - |
| e2 | - |
| i2 | - |
| j2 | - |
| I | J | P | E | P2 | E2 | I2 | J2 |
|---|---|---|---|---|---|---|---|
| 22.42 ft | 6.33 ft | - | - | - | - | - | - |
Blueprints
Sails
SO-DU-IT - GENOA
| Luff | 22 ft - (6706 mm) |
|---|---|
| Foot | 11.25 ft - (3429 mm) |
| Leech | 20.25 ft - (6172 mm) |
| Percentage LP | * 162.56 % |
| Length Perpendicular | * 10.29 ft - (3136 mm) |
| Deck Angle | * 8.12 ° |
| Area | * 113.14 ft² |
| Comments | Per sail plan |
| Edit in Calculator |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.
Comments
