Seawolf 30
Description
The SEAWOLF 30 is a compact cruiser designed by David Feltham. Her substantial displacement provides a comfortable, sea-kindly motion, Her generous sail plan delivers excellent light-air performance. Well-suited for coastal cruising with occasional overnight passages.
Construction Details
| Designer | David Feltham |
|---|---|
| Length | 30.000 ft |
| LOA | 29.750 ft |
| LWL | 23.000 ft |
| Beam | 10.330 ft |
| Displacement | 7900 lb |
| Max Draft | 5.500 ft |
The standard boat dimensions
| i | 37.01 ft |
|---|---|
| j | 10.76 ft |
| p | 39.01 ft |
| e | 12.50 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 37.01 ft | 10.76 ft | 39.01 ft | 12.50 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 39.01 ft - (11890 mm) |
| Foot | * 12.5 ft - (3810 mm) |
| Leech-AftHdBd | * 40.39 ft - (12311 mm) |
| Tack Ang | * 87.97 ° |
| Diag (clew/head) | * 40.54 ft - (12357 mm) |
| Head (inches) | * 6 in |
| Area (no Roach) | 243.53 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | * 30.83 ft - (9397 mm) |
| Foot | * 14.04 ft - (4279 mm) |
| Leech | * 27.17 ft - (8281 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 12.37 ft - (3770 mm) |
| Deck Angle | * 12 ° |
| Area | 190.7 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | * 36.62 ft - (11162 mm) |
| Foot | * 17.2 ft - (5243 mm) |
| Leech | * 34.66 ft - (10564 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 16.14 ft - (4919 mm) |
| Deck Angle | * 4 ° |
| Area | 295.51 ft² |
| Sail Type | SPINNAKER |
|---|---|
| Stays | * 36.62 ft - (11162 mm) |
| MidGirth | * 19.37 ft - (5904 mm) |
| Foot | * 19.37 ft - (5904 mm) |
| Perc LP | * 180 % |
| Area | 602.93 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.