Seafarer 23

Seafarer 23

Description

The Seafarer 23 is an American trailerable coastal cruiser designed by McCurdy & Rhodes and built by Seafarer Yachts in Huntington, New York, USA. Introduced in 1976 with limited production (exact numbers scarce, estimated <50 hulls), it features a fiberglass hull with fin keel (or optional shoal draft at 2'4"), skeg-hung rudder, raked stem, and transom stern, prioritizing simplicity, seaworthiness, and ease of trailering for weekend sailors. This masthead sloop offers a compact teak-trimmed interior sleeping 4 (V-berth forward, saloon settees, portable head), with a focus on light-air performance via an over rigged sail plan and substantial displacement for a smooth, sea-kindly motion in chop. Variants include the Kestrel daysailer (open cockpit, minimal cabin) and later Challenger (1978–1984, refined hull for better pointing).

Construction Details

Designer McCurdy & Rhodes
Builder Seafarer Yachts
Length 23.000 ft
LOA 22.670 ft
LWL 20.000 ft
Beam 7.580 ft
Displacement 2750 lb
Ballast 1060 lb
Max Draft 3.250 ft
Year Built 1976
Request A Sail Quote

The standard boat dimensions

i 26 ft
j 9.25 ft
p 21.75 ft
e 8 ft
p2 -
e2 -
i2 -
j2 -

Sails

Seafarer 23 - MAINSAIL

Luff * 21.75 ft - (6629 mm)
Foot * 8 ft - (2438 mm)
Leech * 22.78 ft - (6943 mm)
Tack Angle * 88 °
Diagonal * 22.91 ft - (6983 mm)
Head (inches) * 4.5 in - (114 mm)
Area * 90.973 ft²
Edit in Calculator

Seafarer 23 - JIBSAIL

Luff * 22.08 ft - (6730 mm)
Foot * 12.49 ft - (3807 mm)
Leech * 18.83 ft - (5739 mm)
Percentage LP * 115 %
Length Perpendicular * 10.64 ft - (3243 mm)
Deck Angle * 12 °
Area * 117.45 ft²
Edit in Calculator

Seafarer 23 - GENOA

Luff * 26.22 ft - (7992 mm)
Foot * 15.14 ft - (4615 mm)
Leech * 24.49 ft - (7465 mm)
Percentage LP * 150 %
Length Perpendicular * 13.88 ft - (4231 mm)
Deck Angle * 4 °
Area * 181.98 ft²
Edit in Calculator

Seafarer 23 - ASYMMETRICAL

Luff * 26.22 ft - (7992 mm)
Foot * 15.26 ft - (4651 mm)
Leech * 24.12 ft - (7352 mm)
Perc LP * 165 %
Area * 300.09 ft²
Edit in Calculator

Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.

Comments

sailboat bimini

© 2025 Good Old Boat, Inc. All rights reserved