San Clemente 23

San Clemente 23

Description

The San Clemente 23 is a compact, lightweight fiberglass daysailer and pocket cruiser from the late 1960s onward, designed by renowned naval architect William I.B. Crealock (also known for models like the Westsail 32) for balanced performance with good light-air capability thanks to a generous sail plan, while offering reasonable comfort for short coastal trips or club racing rather than heavy offshore work. Built primarily by South Coast Fiberglass Products in San Clemente, California (with some later associations to San Clemente Yacht Corp or even Windsong Yachts in Oklahoma noted in ads), it featured molded fiberglass construction in a fin keel with skeg-hung rudder hull; production was limited and somewhat obscure, described as "extremely rare" in many sources, with likely only a small number built (exact quantity not documented but far fewer than mainstream contemporaries like the Cal 25 or Santana 22).

Construction Details

Designer William I.B. Crealock
Builder South Coast Fiberglass Products (San Clemente, CA)
Length 23.000 ft
LOA 23.000 ft
LWL 20.080 ft
Beam 8.000 ft
Displacement 3100 lb
Max Draft 3.830 ft
Request A Sail Quote

The standard boat dimensions

i 27 ft
j 10.50 ft
p 23 ft
e 10 ft
p2 -
e2 -
i2 -
j2 -

Sails

San Clemente 23 - MAINSAIL

Luff * 23 ft - (7010 mm)
Foot * 10 ft - (3048 mm)
Leech * 24.61 ft - (7501 mm)
Tack Angle * 88.01 °
Diagonal * 24.76 ft - (7547 mm)
Head (inches) * 4.5 in - (114 mm)
Area 114.85 ft²
Edit in Calculator

San Clemente 23 - JIBSAIL

Luff * 23.18 ft - (7065 mm)
Foot * 14.44 ft - (4401 mm)
Leech * 19.46 ft - (5931 mm)
Percentage LP * 115 %
Length Perpendicular * 12.08 ft - (3682 mm)
Deck Angle * 12 °
Area 139.95 ft²
Edit in Calculator

San Clemente 23 - GENOA

Luff * 27.52 ft - (8388 mm)
Foot * 17.41 ft - (5307 mm)
Leech * 25.53 ft - (7782 mm)
Percentage LP * 150 %
Length Perpendicular * 15.75 ft - (4801 mm)
Deck Angle * 4 °
Area 216.68 ft²
Edit in Calculator

San Clemente 23 - SPINNAKER

Stays * 27.52 ft - (8388 mm)
MidGirth * 18.9 ft - (5761 mm)
Foot * 18.9 ft - (5761 mm)
Perc LP * 180 %
Area 442.11 ft²
Edit in Calculator

Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.

Comments

Portable hotknife

© 2025 Good Old Boat, Inc. All rights reserved