Samson Marine Design C-Ranger
Description
11 tons center cockpit cutter rig runnning backstays, but want to eliminate those.
Construction Details
Designer | Unknown |
---|---|
Length | 41.000 ft |
The standard boat dimensions
i | 48.25 ft |
---|---|
j | 21.25 ft |
p | 41.50 ft |
e | 16 ft |
p2 | - |
e2 | - |
I | J | P | E | P2 | E2 |
---|---|---|---|---|---|
48.25 ft | 21.25 ft | 41.50 ft | 16 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
Sail Type | MAINSAIL |
---|---|
Luff | * 41.5 ft - (12649 mm) |
Foot | * 16 ft - (4877 mm) |
Leech-AftHdBd | * 43.67 ft - (13311 mm) |
Tack Ang | * 88 ° |
Diag (clew/head) | * 43.95 ft - (13396 mm) |
Head (inches) | * 6 in |
Area (no Roach) | * 340.87 ft² |
Sail Type | JIBSAIL |
---|---|
Luff | * 42.18 ft - (12856 mm) |
Foot | * 30.12 ft - (9181 mm) |
Leech | * 34.66 ft - (10564 mm) |
Percentage LP | * 115.01 % |
Length Perpendicular | * 24.44 ft - (7449 mm) |
Deck Angle | * 11.99 ° |
Area | * 515.44 ft² |
Sail Type | GENOA |
---|---|
Luff | * 50.09 ft - (15267 mm) |
Foot | * 36.03 ft - (10982 mm) |
Leech | * 46.1 ft - (14051 mm) |
Percentage LP | * 150.02 % |
Length Perpendicular | * 31.88 ft - (9717 mm) |
Deck Angle | * 4 ° |
Area | * 798.41 ft² |
Sail Type | DRIFTER |
---|---|
Luff | * 50.09 ft - (15267 mm) |
Foot | * 37.91 ft - (11555 mm) |
Leech | * 43.49 ft - (13256 mm) |
Perc LP | * 150.02 |
Length Perp | * 31.88 |
Deck Angle | * 8.99 ° |
Area | * 798.49 ft² |
Sail Type | SPINNAKER |
---|---|
Luff | * 50.09 ft - (15267 mm) |
MidGirth | * 38.25 ft - (11659 mm) |
Foot | * 38.25 ft - (11659 mm) |
Perc LP | * 180 |
Area | * 1629 ft² |
Sail Type | STORMJIB |
---|---|
Luff | * 29 ft - (8839 mm) |
Foot | * 17.37 ft - (5294 mm) |
Leech | * 21.41 ft - (6526 mm) |
Perc LP | * 60 |
Length Perp | * 12.75 |
Deck Angle | * 19.02 ° |
Area | * 184.84 ft² |
Sail Type | STORMTRYSAIL |
---|---|
Luff | * 16.67 ft - (5081 mm) |
Foot | * 15.33 ft - (4673 mm) |
Leech | * 13.89 ft - (4234 mm) |
Length Perp | * 13.89 |
Tack Angle | * -25 ° |
Area | * 100 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.