ROBERTS 29
Description
The ROBERTS 29 is a sailboat. Her generous sail plan delivers excellent light-air performance.
Construction Details
| Designer | Unknown |
|---|---|
| Length | 29.000 ft |
The standard boat dimensions
| i | 37.42 ft |
|---|---|
| j | 11.33 ft |
| p | 31.50 ft |
| e | 12 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 37.42 ft | 11.33 ft | 31.50 ft | 12 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | GENOA |
|---|---|
| Luff | 36 ft - (10973 mm) |
| Foot | 18.2 ft - (5547 mm) |
| Leech | 34 ft - (10363 mm) |
| Percentage LP | * 149.87 % |
| Length Perpendicular | * 16.98 ft - (5176 mm) |
| Deck Angle | * 4.23 ° |
| Area | * 305.68 ft² |
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 31.5 ft - (9601 mm) |
| Foot | * 12 ft - (3658 mm) |
| Leech-AftHdBd | * 33.07 ft - (10080 mm) |
| Tack Ang | * 88 ° |
| Diag (clew/head) | * 33.31 ft - (10153 mm) |
| Head (inches) | * 5.25 in |
| Area (no Roach) | * 194.95 ft² |
| Sail Type | SPINNAKER |
|---|---|
| Luff | * 37.14 ft - (11320 mm) |
| MidGirth | * 20.39 ft - (6215 mm) |
| Foot | * 20.39 ft - (6215 mm) |
| Perc LP | * 180 |
| Area | 643.69 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | * 37.14 ft - (11320 mm) |
| Foot | * 18.19 ft - (5544 mm) |
| Leech | * 35.07 ft - (10689 mm) |
| Percentage LP | * 150.04 % |
| Length Perpendicular | * 17 ft - (5182 mm) |
| Deck Angle | * 3.98 ° |
| Area | * 315.72 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | * 31.28 ft - (9534 mm) |
| Foot | * 14.88 ft - (4535 mm) |
| Leech | * 27.4 ft - (8352 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 13.03 ft - (3972 mm) |
| Deck Angle | * 12 ° |
| Area | 203.85 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.