RENKEN 18
Description
The RENKEN 18 is a sailboat. Her generous sail plan delivers excellent light-air performance.
Construction Details
| Designer | Unknown |
|---|---|
| Length | 18.000 ft |
The standard boat dimensions
| i | 16 ft |
|---|---|
| j | 8 ft |
| p | 19 ft |
| e | 8 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 16 ft | 8 ft | 19 ft | 8 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | SPINNAKER |
|---|---|
| Luff | * 16.99 ft - (5179 mm) |
| MidGirth | * 14.4 ft - (4389 mm) |
| Foot | * 14.4 ft - (4389 mm) |
| Perc LP | * 180 |
| Area | * 208 ft² |
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 19 ft - (5791 mm) |
| Foot | * 8 ft - (2438 mm) |
| Leech-AftHdBd | * 20.2 ft - (6157 mm) |
| Tack Ang | * 88 ° |
| Diag (clew/head) | * 20.36 ft - (6206 mm) |
| Head (inches) | * 3.5 in |
| Area (no Roach) | * 78.42 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | * 16.99 ft - (5179 mm) |
| Foot | * 13.94 ft - (4249 mm) |
| Leech | * 15.55 ft - (4740 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 12 ft - (3658 mm) |
| Deck Angle | * 4.04 ° |
| Area | * 101.92 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | 16 ft - (4877 mm) |
| Foot | 9 ft - (2743 mm) |
| Leech | 14 ft - (4267 mm) |
| Percentage LP | * 98.12 % |
| Length Perpendicular | * 7.85 ft - (2393 mm) |
| Deck Angle | * 2.75 ° |
| Area | * 62.78 ft² |
| Sail Type | ASYMMETRICAL |
|---|---|
| Luff | 17 ft - (5182 mm) |
| Foot | 14 ft - (4267 mm) |
| Leech | 16 ft - (4877 mm) |
| Perc LP | * 165 |
| Area | * 178 ft² |
| Sail Type | DRIFTER |
|---|---|
| Luff | * 16.99 ft - (5179 mm) |
| Foot | * 14.75 ft - (4496 mm) |
| Leech | * 14.66 ft - (4468 mm) |
| Perc LP | * 150 |
| Length Perp | * 12 |
| Deck Angle | * 8.97 ° |
| Area | * 101.96 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.