Oysterman 23 Sloop
Description
2600 lbs Designed by Bill Menger Menger Enterprises Inc. Babylon, New York
Custom sail calculations are not possible for this boat as no I, J, P and E dimensions are available.
Construction Details
| Designer | Unknown |
|---|---|
| Length | 22.000 ft |
| LOA | 31.250 ft |
| LWL | 21.080 ft |
| Beam | 8.000 ft |
| Displacement | 2600 lb |
| Max Draft | 1.670 ft |
| Min Draft | 0.500 ft |
The standard boat dimensions
| i | - |
|---|---|
| j | - |
| p | - |
| e | - |
| p2 | - |
| e2 | - |
| i2 | - |
| j2 | - |
| I | J | P | E | P2 | E2 | I2 | J2 |
|---|---|---|---|---|---|---|---|
| - | - | - | - | - | - | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, P, and E)
| Sail Type | MAINSAIL |
|---|---|
| Luff | 26 ft - (7925 mm) |
| Foot | 21 ft - (6401 mm) |
| Leech | * 28.66 ft - (8736 mm) |
| Tack Angle | * 75.36 ° |
| Diagonal | 29 ft - (8839 mm) |
| Head (inches) | * 6 in - (152 mm) |
| Area | * 269.42 ft² |
| Sail Type | MAINSAIL |
|---|---|
| Luff | 26.25 ft - (8001 mm) |
| Foot | 21.58 ft - (6578 mm) |
| Leech | * 29.41 ft - (8964 mm) |
| Tack Angle | * 76.23 ° |
| Diagonal | 29.75 ft - (9068 mm) |
| Head (inches) | * 6 in - (152 mm) |
| Area | * 280.52 ft² |
| Sail Type | MAINSAIL |
|---|---|
| Luff | 26.25 ft - (8001 mm) |
| Foot | 10.75 ft - (3277 mm) |
| Leech | * 25.62 ft - (7809 mm) |
| Tack Angle | * 75.91 ° |
| Diagonal | 25.83 ft - (7873 mm) |
| Head (inches) | * 4.5 in - (114 mm) |
| Area | * 140.85 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | 24 ft - (7315 mm) |
| Foot | 9 ft - (2743 mm) |
| Leech | 20 ft - (6096 mm) |
| Area | * 86.81 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | 24.5 ft - (7468 mm) |
| Foot | 9.42 ft - (2871 mm) |
| Leech | 20.5 ft - (6248 mm) |
| Length Perpendicular | * 7.66 ft - (2335 mm) |
| Area | * 93.82 ft² |
| Sail Type | MIZZEN |
|---|---|
| Luff | 20.75 ft - (6325 mm) |
| Foot | 9 ft - (2743 mm) |
| Leech-AftHdBd | 20.18 ft - (6151 mm) |
| Tack Ang | * 74.81 ° |
| Diag (clew/head) | 20.34 ft - (6200 mm) |
| Head (inches) | * 4 in - (102 mm) |
| Area (no Roach) | * 93.07 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.