OTTER II
Description
The OTTER II is a sharpie sailboat designed by Phillip Bolger. The boat has a much lower freeboard and a different rig than the original Otter. Gaff main with a sprit boom, sprit mizzen and a self tacking jib.
Construction Details
| Designer | Bolger, Philip C. |
|---|---|
| Length | 19.000 ft |
| LOA | 19.500 ft |
| Beam | 4.830 ft |
The standard boat dimensions
| i | - |
|---|---|
| j | - |
| p | - |
| e | - |
| p2 | - |
| e2 | - |
| i2 | - |
| j2 | - |
| I | J | P | E | P2 | E2 | I2 | J2 |
|---|---|---|---|---|---|---|---|
| - | - | - | - | - | - | - | - |
Documents
Sails
OTTER II - MIZZEN
| Luff | 13.58 ft - (4139 mm) |
|---|---|
| Foot | 6.58 ft - (2006 mm) |
| Leech-AftHdBd | * 14.75 ft - (4496 mm) |
| Tack Ang | * 87.98 ° |
| Diag (clew/head) | * 14.88 ft - (4535 mm) |
| Head (inches) | * 3.5 in - (89 mm) |
| Area (no Roach) | 44.61 ft² |
| Edit in Calculator |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.
Comments
