Morgan 38 (Catalina)

Description

The Morgan 38 (Catalina), also known as the Catalina/Morgan 38, is a center-cockpit, aft-cabin cruising sailboat designed by Gerry Douglas. Produced by Catalina Yachts after their acquisition of Morgan Yachts, it was built from 1993 to 2005, with fewer than 100 units made. It's well-suited for coastal cruising or live-aboard use, emphasizing comfort and practicality over high-performance racing.

Construction Details

Designer Gerry Douglas
Builder Catalina Yachts
Length 38.420 ft
Request A Sail Quote

The standard boat dimensions

i 50.50 ft
j 14.67 ft
p 42.17 ft
e 15.67 ft
p2 -
e2 -
i2 -
j2 -

Sails

Morgan 38 (Catalina) - MAINSAIL

Luff * 42.17 ft - (12853 mm)
Foot * 15.67 ft - (4776 mm)
Leech * 44.19 ft - (13469 mm)
Tack Angle * 88 °
Diagonal * 44.47 ft - (13554 mm)
Head (inches) * 6 in - (152 mm)
Area * 339.38 ft²
Edit in Calculator

Morgan 38 (Catalina) - JIBSAIL

Luff * 42.07 ft - (12823 mm)
Foot * 19.14 ft - (5834 mm)
Leech * 37.09 ft - (11305 mm)
Percentage LP * 115 %
Length Perpendicular * 16.87 ft - (5142 mm)
Deck Angle * 11.98 °
Area * 354.88 ft²
Edit in Calculator

Morgan 38 (Catalina) - GENOA

Luff * 49.96 ft - (15228 mm)
Foot * 23.44 ft - (7145 mm)
Leech * 47.3 ft - (14417 mm)
Percentage LP * 149.97 %
Length Perpendicular * 22 ft - (6706 mm)
Deck Angle * 3.99 °
Area * 549.57 ft²
Edit in Calculator

Morgan 38 (Catalina) - GENOA

Luff * 49.96 ft - (15228 mm)
Foot * 19.41 ft - (5916 mm)
Leech * 47.3 ft - (14417 mm)
Percentage LP 125 %
Length Perpendicular * 18.34 ft - (5590 mm)
Deck Angle * 2.93 °
Area * 458.1 ft²
Edit in Calculator

Morgan 38 (Catalina) - ASYMMETRICAL

Luff * 49.96 ft - (15228 mm)
Foot * 24.21 ft - (7379 mm)
Leech * 45.96 ft - (14009 mm)
Perc LP * 165 %
Area * 907 ft²
Edit in Calculator

Morgan 38 (Catalina) - STORMJIB

Luff * 28.92 ft - (8815 mm)
Foot * 10.77 ft - (3283 mm)
Leech * 24.36 ft - (7425 mm)
Perc LP * 59.99 %
Length Perp * 8.8 ft - (2682 mm)
Deck Angle * 18.99 °
Area * 127.28 ft²
Edit in Calculator

Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.

Comments