MOODY 58 CUSTOM
Description
50000 lbs. Disp. 20000 lbs. Ballast 48' LWL 16'3" Beam 7' Draft deep 5' Draft shoal
The standard boat dimensions
| i | 70.25 ft |
|---|---|
| j | 23.25 ft |
| p | 63.58 ft |
| e | 19.58 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 70.25 ft | 23.25 ft | 63.58 ft | 19.58 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | ASYMMETRICAL |
|---|---|
| Luff | * 70.3 ft - (21427 mm) |
| Foot | * 38.36 ft - (11692 mm) |
| Leech | * 64.68 ft - (19714 mm) |
| Perc LP | * 165 |
| Area | * 2023 ft² |
| Sail Type | DRIFTER |
|---|---|
| Luff | * 70.3 ft - (21427 mm) |
| Foot | * 39.26 ft - (11966 mm) |
| Leech | * 62.85 ft - (19157 mm) |
| Perc LP | * 150.02 |
| Length Perp | * 34.88 |
| Deck Angle | * 9.01 ° |
| Area | * 1226.08 ft² |
| Sail Type | STORMJIB |
|---|---|
| Luff | * 40.7 ft - (12405 mm) |
| Foot | * 17.54 ft - (5346 mm) |
| Leech | * 33.15 ft - (10104 mm) |
| Perc LP | * 60 |
| Length Perp | * 13.95 |
| Deck Angle | * 18.99 ° |
| Area | * 283.93 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | * 70.3 ft - (21427 mm) |
| Foot | * 37.7 ft - (11491 mm) |
| Leech | * 65.97 ft - (20108 mm) |
| Percentage LP | * 150.02 % |
| Length Perpendicular | * 34.88 ft - (10631 mm) |
| Deck Angle | * 3.99 ° |
| Area | * 1226.05 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | * 59.2 ft - (18044 mm) |
| Foot | * 30.97 ft - (9440 mm) |
| Leech | * 51.13 ft - (15584 mm) |
| Percentage LP | * 115.01 % |
| Length Perpendicular | * 26.74 ft - (8150 mm) |
| Deck Angle | * 11.98 ° |
| Area | * 791.56 ft² |
| Sail Type | SPINNAKER |
|---|---|
| Stays | * 70.3 |
| MidGirth | * 41.85 ft - (12756 mm) |
| Foot | * 41.85 ft - (12756 mm) |
| Perc LP | * 180 |
| Area | * 2501 ft² |
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 63.58 ft - (19379 mm) |
| Foot | * 19.58 ft - (5968 mm) |
| Leech-AftHdBd | * 65.6 ft - (19995 mm) |
| Tack Ang | * 88 ° |
| Diag (clew/head) | * 65.87 ft - (20077 mm) |
| Head (inches) | * 6 in |
| Area (no Roach) | * 635.9 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.