Island Packet 32
Description
12900 lbs. Disp. 5950 lbs. Ballast 32'5" LOD 28'7" LWL 11'6" Beam 4'4" Draft 45' mast height above DWL
Construction Details
| Designer | Robert K. Johnson |
|---|---|
| Length | 35.000 ft |
| LOA | 35.000 ft |
| LWL | 28.580 ft |
| Beam | 11.500 ft |
| Displacement | 13500 lb |
| Max Draft | 4.330 ft |
The standard boat dimensions
| i | 41.42 ft |
|---|---|
| j | 16 ft |
| p | 34.33 ft |
| e | 13 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 41.42 ft | 16 ft | 34.33 ft | 13 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 34.33 ft - (10464 mm) |
| Foot | * 13 ft - (3962 mm) |
| Leech-AftHdBd | * 36 ft - (10973 mm) |
| Tack Ang | * 88 ° |
| Diag (clew/head) | * 36.28 ft - (11058 mm) |
| Head (inches) | * 6 in |
| Area (no Roach) | * 230.5 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | * 35.52 ft - (10826 mm) |
| Foot | * 21.97 ft - (6696 mm) |
| Leech | * 29.86 ft - (9101 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 18.4 ft - (5608 mm) |
| Deck Angle | * 12 ° |
| Area | * 326.8 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | * 42.18 ft - (12856 mm) |
| Foot | * 22.7 ft - (6919 mm) |
| Leech | * 39.13 ft - (11927 mm) |
| Percentage LP | 130 % |
| Length Perpendicular | * 20.82 ft - (6346 mm) |
| Deck Angle | * 2.37 ° |
| Area | * 439.07 ft² |
| Sail Type | ASYMMETRICAL |
|---|---|
| Luff | 43 ft - (13106 mm) |
| Foot | 27 ft - (8230 mm) |
| Leech | 40 ft - (12192 mm) |
| Perc LP | * 165 % |
| Area | * 871 ft² |
| Sail Type | STAYSAIL |
|---|---|
| Luff | 28 ft - (8534 mm) |
| Foot | 9.75 ft - (2972 mm) |
| Leech | 22 ft - (6706 mm) |
| Length Perpendicular | * 6.73 ft - (2051 mm) |
| Area | * 94.22 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.