ILUR by Francois Vivier
Description
The ILUR by Francois Vivier is a sailboat.
Sail calculations are not available for this boat as some dimensions are missing.
Construction Details
| Designer | Unknown |
|---|---|
| Length | 15.000 ft |
The standard boat dimensions
| i | - |
|---|---|
| j | - |
| p | - |
| e | - |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| - | - | - | - | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | LUGSAIL |
|---|---|
| Luff | 7.71 ft - (2350 mm) |
| Foot | 12.106 ft - (3690 mm) |
| Leech | 18.34 ft - (5590 mm) |
| Head | * 80.92 ft - (24664 mm) |
| Diag (clew/throat) | 13.287 ft - (4050 mm) |
| Tack Angle | 11.384 ° |
| Area | * 121.33 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | 11.253 ft - (3430 mm) |
| Foot | 5.545 ft - (1690 mm) |
| Leech | 9.317 ft - (2840 mm) |
| Length Perpendicular | * 4.57 ft - (1393 mm) |
| Area | * 25.73 ft² |
| Sail Type | LUGSAIL |
|---|---|
| Luff | 8.858 ft - (2700 mm) |
| Foot | 11.893 ft - (3625 mm) |
| Leech | 19.029 ft - (5800 mm) |
| Head | * 83.3 ft - (25390 mm) |
| Diag (clew/throat) | 13.976 ft - (4260 mm) |
| Tack Angle | 11.319 ° |
| Area | * 130.82 ft² |
| Sail Type | LEG-O-MUTTON |
|---|---|
| Luff | 9.153 ft - (2790 mm) |
| Foot | 4.068 ft - (1240 mm) |
| Leech | * 8.42 ft - (2566 mm) |
| Tack Angle | * 67.81 ° |
| Diag (clew/head) | 8.497 ft - (2590 mm) |
| Head (Inches) | 1.5 |
| Area | * 17.66 ft² |
| Sail Type | LUGSAIL |
|---|---|
| Luff | 8.891 ft - (2710 mm) |
| Foot | 10.072 ft - (3070 mm) |
| Leech | 18.733 ft - (5710 mm) |
| Head | * 84.62 ft - (25792 mm) |
| Diag (clew/throat) | 12.795 ft - (3900 mm) |
| Tack Angle | 11.155 ° |
| Area | * 114.19 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.