Hunter 37 C
Description
The Hunter 37 C (Cherubini cutter, built 1981–1984) is the factory cutter-rig version of the original John Cherubini-designed Hunter 37, and the one most people picture when they refer to the “Hunter 37 C.” Only about 120 total Hunter 37s were built, and the vast majority left the factory as cutters (a small number were delivered as sloops and later converted).
Construction Details
| Designer | John Cherubini |
|---|---|
| Builder | Hunter Marine |
| Length | 37.000 ft |
The standard boat dimensions
| i | 46.50 ft |
|---|---|
| j | 17 ft |
| p | 39.75 ft |
| e | 13 ft |
| p2 | - |
| e2 | - |
| i2 | - |
| j2 | - |
| I | J | P | E | P2 | E2 | I2 | J2 |
|---|---|---|---|---|---|---|---|
| 46.50 ft | 17 ft | 39.75 ft | 13 ft | - | - | - | - |
Sails
Hunter 37 C - MAINSAIL
| Luff | * 39.75 ft - (12116 mm) |
|---|---|
| Foot | * 13 ft - (3962 mm) |
| Leech | * 41.12 ft - (12533 mm) |
| Tack Angle | * 88 ° |
| Diagonal | * 41.39 ft - (12616 mm) |
| Head (inches) | * 6 in - (152 mm) |
| Area | * 266.9 ft² |
| Edit in Calculator | |
Hunter 37 C - JIBSAIL
| Luff | * 39.61 ft - (12073 mm) |
|---|---|
| Foot | * 23.07 ft - (7032 mm) |
| Leech | * 33.63 ft - (10250 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 19.55 ft - (5959 mm) |
| Deck Angle | * 11.98 ° |
| Area | * 387.21 ft² |
| Edit in Calculator | |
Hunter 37 C - GENOA
| Luff | * 47.03 ft - (14335 mm) |
|---|---|
| Foot | * 27.93 ft - (8513 mm) |
| Leech | * 43.82 ft - (13356 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 25.5 ft - (7772 mm) |
| Deck Angle | * 3.99 ° |
| Area | * 599.64 ft² |
| Edit in Calculator | |
Hunter 37 C - GENOA
| Luff | 42 ft - (12802 mm) |
|---|---|
| Foot | 22.75 ft - (6934 mm) |
| Leech | 34.167 ft - (10414 mm) |
| Percentage LP | * 108.71 % |
| Length Perpendicular | * 18.48 ft - (5633 mm) |
| Deck Angle | * 15.58 ° |
| Area | * 388.15 ft² |
| Edit in Calculator | |
Hunter 37 C - DRIFTER
| Luff | 47.5 ft - (14478 mm) |
|---|---|
| Foot | 34.5 ft - (10516 mm) |
| Leech | 44 ft - (13411 mm) |
| Perc LP | * 180.12 % |
| Length Perp | * 30.62 ft - (9333 mm) |
| Deck Angle | * 7.36 ° |
| Area | * 727.17 ft² |
| Edit in Calculator | |
Hunter 37 C - DRIFTER
| Luff | * 47.03 ft - (14335 mm) |
|---|---|
| Foot | * 29.18 ft - (8894 mm) |
| Leech | * 41.58 ft - (12674 mm) |
| Perc LP | * 150 % |
| Length Perp | * 25.5 ft - (7772 mm) |
| Deck Angle | * 9.01 ° |
| Area | * 599.61 ft² |
| Edit in Calculator | |
Hunter 37 C - ASYMMETRICAL
| Luff | 48 ft - (14630 mm) |
|---|---|
| Foot | 29 ft - (8839 mm) |
| Leech | 45 ft - (13716 mm) |
| Perc LP | * 165 % |
| Area | * 1044 ft² |
| Edit in Calculator | |
Hunter 37 C - ASYMMETRICAL
| Luff | 48 ft - (14630 mm) |
|---|---|
| Foot | 24.75 ft - (7544 mm) |
| Leech | 44 ft - (13411 mm) |
| Perc LP | * 165 % |
| Area | * 891 ft² |
| Edit in Calculator | |
Hunter 37 C - SPINNAKER
| Stays | * 47.03 ft - (14335 mm) |
|---|---|
| MidGirth | * 30.6 ft - (9327 mm) |
| Foot | * 30.6 ft - (9327 mm) |
| Perc LP | * 180 % |
| Area | * 1223 ft² |
| Edit in Calculator | |
Hunter 37 C - YANKEE
| Luff | 45.5 ft - (13868 mm) |
|---|---|
| Foot | 18.75 ft - (5715 mm) |
| Leech | 34.75 ft - (10592 mm) |
| Percentage LP | * 77.47 % |
| Length Perpendicular | * 13.17 ft - (4014 mm) |
| Deck Angle | * 25.29 ° |
| Area | * 299.68 ft² |
| Edit in Calculator | |
Hunter 37 C - STAYSAIL
| Luff | 30 ft - (9144 mm) |
|---|---|
| Foot | 9.5 ft - (2896 mm) |
| Leech | 28 ft - (8534 mm) |
| Length Perpendicular | * 8.86 ft - (2701 mm) |
| Deck Angle | * 5 ° |
| Area | * 132.84 ft² |
| Edit in Calculator | |
Hunter 37 C - STORMJIB
| Luff | * 27.23 ft - (8300 mm) |
|---|---|
| Foot | * 13.14 ft - (4005 mm) |
| Leech | * 21.52 ft - (6559 mm) |
| Perc LP | * 60 % |
| Length Perp | * 10.2 ft - (3109 mm) |
| Deck Angle | * 18.99 ° |
| Area | * 138.89 ft² |
| Edit in Calculator | |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.