Holder 14 MK 1
Description
The Holder 14 MK 1 is a sailboat designed by Hobie Cat.
The standard boat dimensions
| i | - |
|---|---|
| j | - |
| p | - |
| e | - |
| p2 | - |
| e2 | - |
| i2 | - |
| j2 | - |
| I | J | P | E | P2 | E2 | I2 | J2 |
|---|---|---|---|---|---|---|---|
| - | - | - | - | - | - | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, P, and E)
Holder 14 MK 1 - MAINSAIL
| Luff | 16.42 ft - (5005 mm) |
|---|---|
| Foot | 7.67 ft - (2338 mm) |
| Leech | * 17.31 ft - (5276 mm) |
| Tack Angle | * 84.94 ° |
| Diagonal | 17.5 ft - (5334 mm) |
| Head (inches) | 4 in - (102 mm) |
| Area | * 65.11 ft² |
| Edit in Calculator | |
Holder 14 MK 1 - MAINSAIL
| Luff | 16.5 ft - (5029 mm) |
|---|---|
| Foot | 7.75 ft - (2362 mm) |
| Leech | * 17.03 ft - (5191 mm) |
| Tack Angle | * 82.19 ° |
| Diagonal | 17.25 ft - (5258 mm) |
| Head (inches) | 4.5 in - (114 mm) |
| Area | * 65.94 ft² |
| Edit in Calculator | |
Holder 14 MK 1 - JIBSAIL
| Luff | 12.75 ft - (3886 mm) |
|---|---|
| Foot | 6.083 ft - (1854 mm) |
| Leech | 10.75 ft - (3277 mm) |
| Length Perpendicular | * 5.11 ft - (1558 mm) |
| Area | * 32.6 ft² |
| Edit in Calculator | |
Holder 14 MK 1 - JIBSAIL
| Luff | 13.167 ft - (4013 mm) |
|---|---|
| Foot | 6.67 ft - (2033 mm) |
| Leech | 12.292 ft - (3747 mm) |
| Length Perpendicular | * 6.17 ft - (1881 mm) |
| Area | * 40.62 ft² |
| Edit in Calculator | |
Holder 14 MK 1 - JIBSAIL
| Luff | 12.75 ft - (3886 mm) |
|---|---|
| Foot | 6.67 ft - (2033 mm) |
| Leech | 11.25 ft - (3429 mm) |
| Percentage LP | * 117.6 % |
| Length Perpendicular | * 5.88 ft - (1792 mm) |
| Deck Angle | * 7.2 ° |
| Area | * 37.46 ft² |
| Comments | measured from existing furling jib, luff wire is longer, wire is 13' 0.75" long (bearing surfaces) |
| Edit in Calculator | |
Holder 14 MK 1 - ASYMMETRICAL
| Luff | 14 ft - (4267 mm) |
|---|---|
| Foot | 8.5 ft - (2591 mm) |
| Leech | 12.75 ft - (3886 mm) |
| Area | * 89 ft² |
| Edit in Calculator | |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.