Hinckley Pilot 35 Yawl
Description
The Hinckley Pilot 35 is a classic offshore cruising sloop designed by Sparkman & Stephens (design #1727) and built by Henry R. Hinckley & Company in Southwest Harbor, Maine, USA. Produced from 1962 to 1975, 117 examples were completed (primarily sloops, with 12 yawls and a few custom variants, including about a dozen licensed builds for the Chilean Navy), evolving from earlier wooden Pilots into a fiberglass icon emphasizing seaworthiness, timeless aesthetics, and simplicity. This long-keel vessel features a raked stem, counter stern, and moderate overhangs for elegant lines, with a robust hand-laid fiberglass hull (up to 1-inch thick at the keel) and a hull-deck joint secured by a bolted aluminum toe rail. Known for its balanced performance—strong upwind in moderate winds, forgiving motion in seaways, and single-handed manageability—it's a favorite for coastal and bluewater sailors, though the short rig limits light-air speed, and the full keel yields a wide turning radius (poor in reverse). Interiors use Philippine mahogany sheathing over fiberglass, with teak-and-holly soles and layouts sleeping 4–6 (V-berth forward, saloon settees, compact galley, and cramped head). Construction is legendary, with minimal failures reported over decades, though minor blistering or mast-step issues may arise in vintage hulls.
Construction Details
| Designer | Sparkman and Stephens |
|---|---|
| Builder | Henry R. Hinckley & Co. |
| Length | 35.000 ft |
| LOA | 35.750 ft |
| LWL | 25.000 ft |
| Beam | 9.500 ft |
| Displacement | 13700 lb |
| Ballast | 4600 lb |
| Max Draft | 5.000 ft |
| Year Built | 1962 |
The standard boat dimensions
| i | 38.80 ft |
|---|---|
| j | 12.25 ft |
| p | 33.83 ft |
| e | 15.50 ft |
| p2 | 18.10 ft |
| e2 | 7.60 ft |
| i2 | - |
| j2 | - |
| I | J | P | E | P2 | E2 | I2 | J2 |
|---|---|---|---|---|---|---|---|
| 38.80 ft | 12.25 ft | 33.83 ft | 15.50 ft | 18.10 ft | 7.60 ft | - | - |
Sails
Hinckley Pilot 35 Yawl - MAINSAIL
| Luff | * 33.83 ft - (10311 mm) |
|---|---|
| Foot | * 15.5 ft - (4724 mm) |
| Leech | * 36.56 ft - (11143 mm) |
| Tack Angle | * 88 ° |
| Diagonal | * 36.72 ft - (11192 mm) |
| Head (inches) | * 4.5 in - (114 mm) |
| Area | * 268.264 ft² |
| Edit in Calculator |
Hinckley Pilot 35 Yawl - JIBSAIL
| Luff | * 32.55 ft - (9921 mm) |
|---|---|
| Foot | * 16.19 ft - (4935 mm) |
| Leech | * 28.33 ft - (8635 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 14.09 ft - (4295 mm) |
| Deck Angle | * 12 ° |
| Area | * 229.33 ft² |
| Edit in Calculator |
Hinckley Pilot 35 Yawl - GENOA
| Luff | * 38.66 ft - (11784 mm) |
|---|---|
| Foot | * 19.75 ft - (6020 mm) |
| Leech | * 36.41 ft - (11098 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 18.38 ft - (5602 mm) |
| Deck Angle | * 4 ° |
| Area | * 355.27 ft² |
| Edit in Calculator |
Hinckley Pilot 35 Yawl - ASYMMETRICAL
| Luff | * 38.66 ft - (11784 mm) |
|---|---|
| Foot | * 20.21 ft - (6160 mm) |
| Leech | * 35.57 ft - (10842 mm) |
| Perc LP | * 165 % |
| Area | * 585.99 ft² |
| Edit in Calculator |
Hinckley Pilot 35 Yawl - MIZZEN
| Luff | * 18.1 ft - (5517 mm) |
|---|---|
| Foot | * 7.6 ft - (2316 mm) |
| Leech-AftHdBd | * 19.38 ft - (5907 mm) |
| Tack Ang | * 88 ° |
| Diag (clew/head) | * 19.38 ft - (5907 mm) |
| Head (inches) | * 3 in - (76 mm) |
| Area (no Roach) | * 70.677 ft² |
| Edit in Calculator |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.
Comments
