Gulfstar (Hirsch)
Description
26000 lbs
Construction Details
| Designer | Unknown |
|---|---|
| Length | 45.000 ft |
| LOA | 44.670 ft |
| LWL | 35.500 ft |
| Beam | 13.170 ft |
| Displacement | 26000 lb |
| Max Draft | 5.500 ft |
The standard boat dimensions
| i | 45.10 ft |
|---|---|
| j | 15.20 ft |
| p | 37.30 ft |
| e | 19 ft |
| p2 | 45.10 ft |
| e2 | 15.20 ft |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 45.10 ft | 15.20 ft | 37.30 ft | 19 ft | 45.10 ft | 15.20 ft |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 37.3 ft - (11369 mm) |
| Foot | * 19 ft - (5791 mm) |
| Leech-AftHdBd | * 40.98 ft - (12491 mm) |
| Tack Ang | * 88 ° |
| Diag (clew/head) | * 41.27 ft - (12579 mm) |
| Head (inches) | * 6 in |
| Area (no Roach) | * 362.52 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | * 45.21 ft - (13780 mm) |
| Foot | * 24.7 ft - (7529 mm) |
| Leech | * 42.37 ft - (12914 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 22.8 ft - (6949 mm) |
| Deck Angle | * 3.99 ° |
| Area | * 515.41 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | * 38.07 ft - (11604 mm) |
| Foot | * 20.31 ft - (6190 mm) |
| Leech | * 32.78 ft - (9991 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 17.48 ft - (5328 mm) |
| Deck Angle | * 11.98 ° |
| Area | * 332.75 ft² |
| Sail Type | ASYMMETRICAL |
|---|---|
| Luff | * 45.21 ft - (13780 mm) |
| Foot | * 25.08 ft - (7644 mm) |
| Leech | * 41.59 ft - (12677 mm) |
| Perc LP | * 165 |
| Area | * 850 ft² |
| Sail Type | MIZZEN |
|---|---|
| Luff | * 45.1 ft - (13746 mm) |
| Foot | * 15.2 ft - (4633 mm) |
| Leech-AftHdBd | * 46.69 ft - (14231 mm) |
| Tack Ang | * 88 ° |
| Diag (clew/head) | * 47.09 ft - (14353 mm) |
| Head (inches) | * 6 in |
| Area (no Roach) | * 349.58 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.