Fayerweather Dink
Description
Hull weight varies from 34Lbs, to 100 Lbs depending on wood construction vs foam core construction. Boat design is same either method. These are a home built dink used for frostbiting. Durable and loads of fun.
Custom sail calculations are not possible for this boat as no I, J, P and E dimensions are available.
The standard boat dimensions
| i | 7.33 ft |
|---|---|
| j | - |
| p | - |
| e | - |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 7.33 ft | - | - | - | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | SPRIT |
|---|---|
| Luff | 6.83 ft - (2082 mm) |
| Foot | 7.58 ft - (2310 mm) |
| Head | * 88 ft - (26822 mm) |
| Diag (clew/throat) | * 10.02 ft - (3054 mm) |
| Tack Angle | 4.58 ° |
| Area | 72 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.