ELVER
Description
The ELVER is a sailboat designed by Steve Redmond.
Sail calculations are not available for this boat as no dimensions are available.
The standard boat dimensions
| i | - |
|---|---|
| j | - |
| p | - |
| e | - |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| - | - | - | - | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | SPRIT |
|---|---|
| Luff | 10.25 ft - (3124 mm) |
| Foot | 10.25 ft - (3124 mm) |
| Leech | 16.75 ft - (5105 mm) |
| Head | * 80.53 ft - (24546 mm) |
| Diag (clew/throat) | 13.25 ft - (4039 mm) |
| Tack Angle | 10 ° |
| Area | * 118.06 ft² |
| Sail Type | LUGSAIL |
|---|---|
| Luff | 4.25 ft - (1295 mm) |
| Foot | 5 ft - (1524 mm) |
| Leech | 8 ft - (2438 mm) |
| Head | * 84.6 ft - (25786 mm) |
| Diag (clew/throat) | 6.25 ft - (1905 mm) |
| Tack Angle | 4.5 ° |
| Area | * 24.59 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | 11.5 ft - (3505 mm) |
| Foot | 7 ft - (2134 mm) |
| Leech | 9.5 ft - (2896 mm) |
| Area | * 33.2 ft² |
| Sail Type | GAFF MAIN |
|---|---|
| Luff | 10.25 ft - (3124 mm) |
| Foot | 10.25 ft - (3124 mm) |
| Leech | 16.75 ft - (5105 mm) |
| Head | * 80.53 ft - (24546 mm) |
| Diag (clew/throat) | 13.25 ft - (4039 mm) |
| Tack Angle | 10 ° |
| Area | * 118.06 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | 14.435 ft - (4400 mm) |
| Foot | 7 ft - (2134 mm) |
| Leech | 12.63 ft - (3850 mm) |
| Length Perpendicular | * 6.12 ft - (1865 mm) |
| Area | * 44.2 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.