Crown 28
Description
28 ft sloop similar to Cal 29. Crowns were originaly modified Cal 29 designs Mfg by Calgan Marine Ltd. Canada "Just enough" changes were made to Lapworths original design.
Construction Details
| Designer | C. William Lapworth |
|---|---|
| Length | 28.000 ft |
| LOA | 27.750 ft |
| LWL | 23.330 ft |
| Beam | 8.830 ft |
| Displacement | 6700 lb |
| Max Draft | 4.830 ft |
The standard boat dimensions
| i | 36.67 ft |
|---|---|
| j | 11.83 ft |
| p | 31 ft |
| e | 10 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 36.67 ft | 11.83 ft | 31 ft | 10 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 31 ft - (9449 mm) |
| Foot | * 10 ft - (3048 mm) |
| Leech-AftHdBd | * 32.04 ft - (9766 mm) |
| Tack Ang | * 88 ° |
| Diag (clew/head) | * 32.24 ft - (9827 mm) |
| Head (inches) | * 4.5 in |
| Area (no Roach) | * 160.01 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | * 30.82 ft - (9394 mm) |
| Foot | * 15.68 ft - (4779 mm) |
| Leech | * 26.73 ft - (8147 mm) |
| Percentage LP | * 114.96 % |
| Length Perpendicular | * 13.6 ft - (4145 mm) |
| Deck Angle | * 11.98 ° |
| Area | * 209.55 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | * 36.6 ft - (11156 mm) |
| Foot | * 19.12 ft - (5828 mm) |
| Leech | * 34.4 ft - (10485 mm) |
| Percentage LP | * 149.96 % |
| Length Perpendicular | * 17.74 ft - (5407 mm) |
| Deck Angle | * 4.01 ° |
| Area | * 324.67 ft² |
| Sail Type | ASYMMETRICAL |
|---|---|
| Luff | * 36.6 ft - (11156 mm) |
| Foot | * 19.52 ft - (5950 mm) |
| Leech | * 33.67 ft - (10263 mm) |
| Perc LP | * 165 % |
| Area | * 536 ft² |
| Sail Type | STORMJIB |
|---|---|
| Luff | * 21.19 ft - (6459 mm) |
| Foot | * 8.88 ft - (2707 mm) |
| Leech | * 17.37 ft - (5294 mm) |
| Perc LP | * 60.02 % |
| Length Perp | * 7.1 ft - (2164 mm) |
| Deck Angle | * 19.06 ° |
| Area | * 75.2 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.