Creekmore 45 Sloop/Cutter
Description
Ray Creekmore design, hull built by Henry Whited in 1980 as an aft cockpit sloop/cutter rig, but never finished. Currently owned by Brendan Slagle. Boat name: Creeky
The standard boat dimensions
i | 55 ft |
---|---|
j | 20 ft |
p | 51.50 ft |
e | 18.50 ft |
p2 | - |
e2 | - |
I | J | P | E | P2 | E2 |
---|---|---|---|---|---|
55 ft | 20 ft | 51.50 ft | 18.50 ft | - | - |
Sails
Sail Type | MAINSAIL |
---|---|
Luff | * 51.5 ft - (15697 mm) |
Foot | * 18 ft - (5486 mm) |
Leech | * 53.68 ft - (16362 mm) |
Tack Angle | * 88 ° |
Diagonal | * 53.96 ft - (16447 mm) |
Head (inches) | * 6 in - (152 mm) |
Area | * 474.37 ft² |
Sail Type | GENOA |
---|---|
Luff | * 55.6 ft - (16947 mm) |
Foot | * 32.83 ft - (10007 mm) |
Leech | * 51.83 ft - (15798 mm) |
Percentage LP | * 150 % |
Length Perpendicular | * 30 ft - (9144 mm) |
Deck Angle | * 3.98 ° |
Area | * 834 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.