Coronado 41
Description
The Coronado 41 is an American coastal/offshore cruiser-racer sailboat designed by William H. Tripp Jr., introduced in 1972. Built by Coronado Yachts (a Whittaker Corp. division) until 1975, approximately 50–100 units were produced, making it relatively rare. It's a stretched evolution of the Coronado 35, sharing a similar hull form with the Columbia 41, and was offered in sloop and ketch rigs for versatility.
Construction Details
| Designer | William H. Tripp |
|---|---|
| Builder | Coronado Yachts |
| Length | 40.500 ft |
| LOA | 40.500 ft |
| LWL | 31.670 ft |
| Beam | 11.250 ft |
| Displacement | 19500 lb |
| Ballast | 8500 lb |
| Max Draft | 6.250 ft |
| Notes | The center cockpit version is shown here, but the aft cockpit version probably made up about 70% of the boats sold. We believe that the sail plan was the same for both versions. |
The standard boat dimensions
| i | 45 ft |
|---|---|
| j | 17 ft |
| p | 38 ft |
| e | 13.50 ft |
| p2 | - |
| e2 | - |
| i2 | - |
| j2 | - |
| I | J | P | E | P2 | E2 | I2 | J2 |
|---|---|---|---|---|---|---|---|
| 45 ft | 17 ft | 38 ft | 13.50 ft | - | - | - | - |
Sails
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 38 ft - (11582 mm) |
| Foot | * 13.5 ft - (4115 mm) |
| Leech | * 39.6 ft - (12070 mm) |
| Tack Angle | * 88 ° |
| Diagonal | * 39.88 ft - (12155 mm) |
| Head (inches) | * 6 in - (152 mm) |
| Area | * 264.57 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | * 38.48 ft - (11729 mm) |
| Foot | * 23.23 ft - (7081 mm) |
| Leech | * 32.48 ft - (9900 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 19.55 ft - (5959 mm) |
| Deck Angle | * 11.99 ° |
| Area | * 376.18 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | 44.75 ft - (13640 mm) |
| Foot | 26.25 ft - (8001 mm) |
| Leech | 41.25 ft - (12573 mm) |
| Percentage LP | * 140.06 % |
| Length Perpendicular | * 23.81 ft - (7257 mm) |
| Deck Angle | * 4.23 ° |
| Area | * 532.64 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | 44.25 ft - (13487 mm) |
| Foot | 30.25 ft - (9220 mm) |
| Leech | 41.5 ft - (12649 mm) |
| Percentage LP | * 160.65 % |
| Length Perpendicular | * 27.31 ft - (8324 mm) |
| Deck Angle | * 4.77 ° |
| Area | * 604.28 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | * 45.7 ft - (13929 mm) |
| Foot | * 28.07 ft - (8556 mm) |
| Leech | * 42.47 ft - (12945 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 25.5 ft - (7772 mm) |
| Deck Angle | * 4.02 ° |
| Area | * 582.64 ft² |
| Sail Type | DRIFTER |
|---|---|
| Luff | * 45.7 ft - (13929 mm) |
| Foot | * 29.36 ft - (8949 mm) |
| Leech | * 40.25 ft - (12268 mm) |
| Perc LP | * 150 % |
| Length Perp | * 25.5 ft - (7772 mm) |
| Deck Angle | * 9.03 ° |
| Area | * 582.62 ft² |
| Sail Type | ASYMMETRICAL |
|---|---|
| Luff | 46 ft - (14021 mm) |
| Foot | 29 ft - (8839 mm) |
| Leech | 43 ft - (13106 mm) |
| Perc LP | * 165 % |
| Area | * 1000 ft² |
| Sail Type | SPINNAKER |
|---|---|
| Stays | * 45.7 ft - (13929 mm) |
| MidGirth | * 30.6 ft - (9327 mm) |
| Foot | * 30.6 ft - (9327 mm) |
| Perc LP | * 180 % |
| Area | * 1189 ft² |
| Sail Type | STORMJIB |
|---|---|
| Luff | * 26.46 ft - (8065 mm) |
| Foot | * 13.26 ft - (4042 mm) |
| Leech | * 20.68 ft - (6303 mm) |
| Perc LP | * 60 % |
| Length Perp | * 10.2 ft - (3109 mm) |
| Deck Angle | * 19.01 ° |
| Area | * 134.96 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.