Coronado 32 Mk Ii
Description
11000 lbs. Disp. 5100 lbs. Ballast 26'10" LWL 9'5" Beam 5'10" Draft 515 Sail Area 15 Gal. Fuel 20 Gal. Water Palmer P-60 engine
The standard boat dimensions
i | 42 ft |
---|---|
j | 13.25 ft |
p | 37 ft |
e | 12.50 ft |
p2 | - |
e2 | - |
I | J | P | E | P2 | E2 |
---|---|---|---|---|---|
42 ft | 13.25 ft | 37 ft | 12.50 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
Sail Type | MAINSAIL |
---|---|
Luff | * 37 ft - (11278 mm) |
Foot | * 12.5 ft - (3810 mm) |
Leech | * 38.37 ft - (11695 mm) |
Tack Angle | * 88 ° |
Diagonal | * 38.64 ft - (11777 mm) |
Head (inches) | * 6 in - (152 mm) |
Area | * 239.21 ft² |
Sail Type | JIBSAIL |
---|---|
Luff | * 35.23 ft - (10738 mm) |
Foot | * 17.51 ft - (5337 mm) |
Leech | * 30.66 ft - (9345 mm) |
Percentage LP | * 115.02 % |
Length Perpendicular | * 15.24 ft - (4645 mm) |
Deck Angle | * 12 ° |
Area | * 268.42 ft² |
Sail Type | GENOA |
---|---|
Luff | * 41.84 ft - (12753 mm) |
Foot | * 21.37 ft - (6514 mm) |
Leech | * 39.39 ft - (12006 mm) |
Percentage LP | * 150.04 % |
Length Perpendicular | * 19.88 ft - (6059 mm) |
Deck Angle | * 4 ° |
Area | * 415.92 ft² |
Sail Type | DRIFTER |
---|---|
Luff | * 41.84 ft - (12753 mm) |
Foot | * 22.22 ft - (6773 mm) |
Leech | * 37.6 ft - (11460 mm) |
Perc LP | * 150.04 % |
Length Perp | * 19.88 ft - (6059 mm) |
Deck Angle | * 9.02 ° |
Area | * 415.89 ft² |
Sail Type | ASYMMETRICAL |
---|---|
Luff | * 41.84 ft - (12753 mm) |
Foot | * 21.86 ft - (6663 mm) |
Leech | * 38.49 ft - (11732 mm) |
Perc LP | * 165 % |
Area | * 686 ft² |
Sail Type | SPINNAKER |
---|---|
Stays | * 41.84 ft - (12753 mm) |
MidGirth | * 23.85 ft - (7269 mm) |
Foot | * 23.85 ft - (7269 mm) |
Perc LP | * 180 % |
Area | * 848 ft² |
Sail Type | STORMJIB |
---|---|
Luff | * 24.22 ft - (7382 mm) |
Foot | * 9.89 ft - (3014 mm) |
Leech | * 19.99 ft - (6093 mm) |
Perc LP | * 60 % |
Length Perp | * 7.95 ft - (2423 mm) |
Deck Angle | * 18.97 ° |
Area | * 96.3 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.