Coronado 28

Description

The Coronado 28 is an American coastal cruiser-racer sailboat designed by William Atkin Crealock, introduced in 1974. Built briefly by Coronado Yachts (a Whittaker Corp. division) until 1975, approximately 50–100 units were produced, making it relatively rare. It's essentially a rebadged Columbia 28, sharing the same hull molds during the Whittaker era when the brands overlapped.

Construction Details

Designer William Crealock
Builder Coronado Yachts
Length 28.000 ft
LOA 28.000 ft
LWL 22.160 ft
Beam 8.500 ft
Displacement 6800 lb
Max Draft 4.830 ft
Request A Sail Quote

The standard boat dimensions

i 34 ft
j 12.42 ft
p 27.33 ft
e 11.33 ft
p2 17 ft
e2 5.50 ft
i2 -
j2 -

Sails

Sail Type MAINSAIL
Luff * 27.33 ft - (8330 mm)
Foot * 11.33 ft - (3453 mm)
Leech * 28.97 ft - (8830 mm)
Tack Angle * 88 °
Diagonal * 29.22 ft - (8906 mm)
Head (inches) * 5.25 in - (133 mm)
Area * 159.95 ft²
Sail Type JIBSAIL
Luff * 28.96 ft - (8827 mm)
Foot * 16.85 ft - (5136 mm)
Leech * 24.59 ft - (7495 mm)
Percentage LP * 114.98 %
Length Perpendicular * 14.28 ft - (4353 mm)
Deck Angle * 11.99 °
Area * 206.79 ft²
Sail Type GENOA
Luff * 34.39 ft - (10482 mm)
Foot * 20.4 ft - (6218 mm)
Leech * 32.05 ft - (9769 mm)
Percentage LP * 150 %
Length Perpendicular * 18.63 ft - (5678 mm)
Deck Angle * 3.97 °
Area * 320.35 ft²
Sail Type DRIFTER
Luff * 34.39 ft - (10482 mm)
Foot * 21.31 ft - (6495 mm)
Leech * 30.42 ft - (9272 mm)
Perc LP * 150 %
Length Perp * 18.63 ft - (5678 mm)
Deck Angle * 8.97 °
Area * 320.37 ft²
Sail Type ASYMMETRICAL
Luff * 34.39 ft - (10482 mm)
Foot * 20.49 ft - (6245 mm)
Leech * 31.64 ft - (9644 mm)
Perc LP * 165 %
Area * 528 ft²
Sail Type SPINNAKER
Stays * 34.39 ft - (10482 mm)
MidGirth * 22.36 ft - (6815 mm)
Foot * 22.36 ft - (6815 mm)
Perc LP * 180 %
Area * 654 ft²
Sail Type STORMJIB
Luff * 19.91 ft - (6069 mm)
Foot * 9.59 ft - (2923 mm)
Leech * 15.75 ft - (4801 mm)
Perc LP * 59.98 %
Length Perp * 7.45 ft - (2271 mm)
Deck Angle * 18.93 °
Area * 74.19 ft²

Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.