Com-Pac 23/3
Description
3000 lbs. Disp. 1340 lbs. Ballast 20'2" LWL 7'10" Beam 2'3" Draft
Construction Details
| Designer | Clark W. Mills |
|---|---|
| Length | 22.750 ft |
| LOA | 23.920 ft |
| LWL | 20.170 ft |
| Beam | 7.830 ft |
| Displacement | 3000 lb |
| Max Draft | 2.250 ft |
The standard boat dimensions
| i | 26 ft |
|---|---|
| j | 9.42 ft |
| p | 22.75 ft |
| e | 8.50 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 26 ft | 9.42 ft | 22.75 ft | 8.50 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | ASYMMETRICAL |
|---|---|
| Luff | * 26.27 ft - (8007 mm) |
| Foot | * 15.54 ft - (4737 mm) |
| Leech | * 24.17 ft - (7367 mm) |
| Perc LP | * 165 |
| Area | * 306 ft² |
| Sail Type | DRIFTER |
|---|---|
| Luff | * 26.27 ft - (8007 mm) |
| Foot | * 16.14 ft - (4919 mm) |
| Leech | * 23.25 ft - (7087 mm) |
| Perc LP | * 150 |
| Length Perp | * 14.13 |
| Deck Angle | * 9 ° |
| Area | * 185.57 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | * 26.27 ft - (8007 mm) |
| Foot | * 15.46 ft - (4712 mm) |
| Leech | * 24.49 ft - (7465 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 14.13 ft - (4307 mm) |
| Deck Angle | * 4.01 ° |
| Area | * 185.62 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | * 22.12 ft - (6742 mm) |
| Foot | * 12.76 ft - (3889 mm) |
| Leech | * 18.8 ft - (5730 mm) |
| Percentage LP | * 114.97 % |
| Length Perpendicular | * 10.83 ft - (3301 mm) |
| Deck Angle | * 12.03 ° |
| Area | * 119.75 ft² |
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 22.75 ft - (6934 mm) |
| Foot | * 8.5 ft - (2591 mm) |
| Leech-AftHdBd | * 23.83 ft - (7263 mm) |
| Tack Ang | * 88 ° |
| Diag (clew/head) | * 24.01 ft - (7318 mm) |
| Head (inches) | * 4 in |
| Area (no Roach) | * 99.99 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.