Com-Pac 19/2
Description
2000 lbs. Disp. 800 lbs. Ballast 16'4" LWL 7' Beam 2' Draft 25' Mast height above DWL
Construction Details
| Designer | Robert K. Johnson |
|---|---|
| Length | 19.000 ft |
| LOA | 20.080 ft |
| LWL | 16.330 ft |
| Beam | 7.000 ft |
| Displacement | 2000 lb |
| Max Draft | 2.000 ft |
The standard boat dimensions
| i | 21.75 ft |
|---|---|
| j | 7.17 ft |
| p | 18.75 ft |
| e | 8 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 21.75 ft | 7.17 ft | 18.75 ft | 8 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 18.75 ft - (5715 mm) |
| Foot | * 8 ft - (2438 mm) |
| Leech-AftHdBd | * 19.96 ft - (6084 mm) |
| Tack Ang | * 88 ° |
| Diag (clew/head) | * 20.13 ft - (6136 mm) |
| Head (inches) | * 3.5 in |
| Area (no Roach) | * 77.34 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | * 18.32 ft - (5584 mm) |
| Foot | * 9.55 ft - (2911 mm) |
| Leech | * 15.83 ft - (4825 mm) |
| Percentage LP | * 115.06 % |
| Length Perpendicular | * 8.25 ft - (2515 mm) |
| Deck Angle | * 12 ° |
| Area | * 75.57 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | * 21.76 ft - (6632 mm) |
| Foot | * 11.63 ft - (3545 mm) |
| Leech | * 20.41 ft - (6221 mm) |
| Percentage LP | * 150.07 % |
| Length Perpendicular | * 10.76 ft - (3280 mm) |
| Deck Angle | * 4.07 ° |
| Area | * 117.06 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | 21.75 ft - (6629 mm) |
| Foot | 11.92 ft - (3633 mm) |
| Leech | 20.5 ft - (6248 mm) |
| Percentage LP | * 154.11 % |
| Length Perpendicular | * 11.05 ft - (3368 mm) |
| Deck Angle | * 3.83 ° |
| Area | * 120.12 ft² |
| Sail Type | ASYMMETRICAL |
|---|---|
| Luff | 22 ft - (6706 mm) |
| Foot | 12 ft - (3658 mm) |
| Leech | 20.25 ft - (6172 mm) |
| Perc LP | * 165 % |
| Area | * 198 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.