Columbia 35

Description

The Columbia 35, designed by renowned naval architect William H. Tripp Jr., was produced by Columbia Yachts in a ultra-limited run of just 5 hulls during 1975. This masthead sloop stands out as one of the brand's final offerings, blending Tripp's signature performance-oriented hull with practical cruising amenities—featuring a fin keel for speed and a skeg-hung rudder for protection, making it a rare, capable bluewater contender that sleeps 5–6 in a teak-finished interior.

Construction Details

Designer William H. Tripp Jr.
Builder Columbia Yachts
Length 35.167 ft
LOA 35.670 ft
LWL 27.330 ft
Beam 10.000 ft
Displacement 11350 lb
Ballast 4050 lb
Max Draft 5.500 ft
Year Built 1975
Request A Sail Quote

The standard boat dimensions

i 42 ft
j 14.30 ft
p 36.25 ft
e 13 ft
p2 -
e2 -
i2 -
j2 -

Sails

Columbia 35 - MAINSAIL

Luff * 36.25 ft - (11049 mm)
Foot * 13 ft - (3962 mm)
Leech * 37.8 ft - (11521 mm)
Tack Angle * 88 °
Diagonal * 38.08 ft - (11607 mm)
Head (inches) * 6 in - (152 mm)
Area * 243.34 ft²
Edit in Calculator

Columbia 35 - JIBSAIL

Luff * 35.49 ft - (10817 mm)
Foot * 19.14 ft - (5834 mm)
Leech * 30.5 ft - (9296 mm)
Percentage LP * 114.97 %
Length Perpendicular * 16.44 ft - (5011 mm)
Deck Angle * 12 °
Area * 291.74 ft²
Edit in Calculator

Columbia 35 - GENOA

Luff * 42.15 ft - (12847 mm)
Foot * 23.27 ft - (7093 mm)
Leech * 39.47 ft - (12030 mm)
Percentage LP * 150 %
Length Perpendicular * 21.45 ft - (6538 mm)
Deck Angle * 4 °
Area * 452.09 ft²
Edit in Calculator

Columbia 35 - ASYMMETRICAL

Luff * 42.15 ft - (12847 mm)
Foot * 23.6 ft - (7193 mm)
Leech * 38.78 ft - (11820 mm)
Perc LP * 165 %
Area * 746 ft²
Edit in Calculator

Columbia 35 - SPINNAKER

Stays * 42.15 ft - (12847 mm)
MidGirth * 25.74 ft - (7846 mm)
Foot * 25.74 ft - (7846 mm)
Perc LP * 180 %
Area * 922 ft²
Edit in Calculator

Columbia 35 - STORMJIB

Luff * 24.4 ft - (7437 mm)
Foot * 10.86 ft - (3310 mm)
Leech * 19.71 ft - (6008 mm)
Perc LP * 60 %
Length Perp * 8.58 ft - (2615 mm)
Deck Angle * 19 °
Area * 104.69 ft²
Edit in Calculator

Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.

Comments