Classic 12
Description
The CLASSIC 12 was manufactured in National City, California, during the 70s. They left no imprint on the internet. They also produced 7-, 8-, and 10-foot dinghies. Each length was available as a "Classic" model and as an "La Playa" model with added trim features.
The standard boat dimensions
| i | - |
|---|---|
| j | - |
| p | 10 ft |
| e | 7.50 ft |
| p2 | - |
| e2 | - |
| i2 | - |
| j2 | - |
| I | J | P | E | P2 | E2 | I2 | J2 |
|---|---|---|---|---|---|---|---|
| - | - | 10 ft | 7.50 ft | - | - | - | - |
Sails
| Sail Type | MAINSAIL |
|---|---|
| Luff | 10 ft - (3048 mm) |
| Foot | 7.5 ft - (2286 mm) |
| Leech | * 12.11 ft - (3691 mm) |
| Tack Angle | * 88.01 ° |
| Diagonal | * 12.29 ft - (3746 mm) |
| Head (inches) | * 3.5 in - (89 mm) |
| Area | 37.42 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.