Choate 22

Choate 22

Description

The Choate 22 is an obscure entry in sailboat databases, listed as a small fiberglass sailboat with limited production details available. It's associated with Dennis Choate (or Choate Marine/Dencho Marine), a Long Beach, California-based builder known for custom and semi-custom racing/cruising sailboats in the 1970s–1980s (e.g., Choate 27/CF-27, Choate 37/40, and larger IOR-influenced racers like the Peterson/Choate 48). Choate was a respected yard for high-performance West Coast boats, often built strong and light with good light-air performance. However, the Choate 22 appears to be very rare or possibly a custom/one-off prototype—there's no widespread production run, designer credit (listed as "unknown"), or active owner community in current sources. It may have been a small daysailer, trailerable racer, or early power/sail hybrid experiment

Construction Details

Designer Dennis Choate
Builder Dencho Marine
Length 22.000 ft
Request A Sail Quote

The standard boat dimensions

i 29.50 ft
j 9 ft
p 26.40 ft
e 9.40 ft
p2 -
e2 -
i2 -
j2 -

Sails

Choate 22 - MAINSAIL

Luff * 26.4 ft - (8047 mm)
Foot * 9.4 ft - (2865 mm)
Leech * 27.5 ft - (8382 mm)
Tack Angle * 88 °
Diagonal * 27.71 ft - (8446 mm)
Head (inches) * 4.5 in - (114 mm)
Area * 128.29 ft²
Edit in Calculator

Choate 22 - JIBSAIL

Luff * 24.67 ft - (7519 mm)
Foot * 11.83 ft - (3606 mm)
Leech * 21.58 ft - (6578 mm)
Percentage LP * 115 %
Length Perpendicular * 10.35 ft - (3155 mm)
Deck Angle * 12.02 °
Area * 127.64 ft²
Edit in Calculator

Choate 22 - GENOA

Luff 29.5 ft - (8992 mm)
Foot 14.38 ft - (4383 mm)
Leech 28 ft - (8534 mm)
Percentage LP * 150 %
Length Perpendicular * 13.5 ft - (4115 mm)
Deck Angle * 3.24 °
Area * 199.05 ft²
Edit in Calculator

Choate 22 - GENOA

Luff * 29.3 ft - (8931 mm)
Foot * 14.46 ft - (4407 mm)
Leech * 27.64 ft - (8425 mm)
Percentage LP * 150 %
Length Perpendicular * 13.5 ft - (4115 mm)
Deck Angle * 4.03 °
Area * 197.77 ft²
Edit in Calculator

Choate 22 - SPINNAKER

Stays * 29.3 ft - (8931 mm)
MidGirth * 16.2 ft - (4938 mm)
Foot * 16.2 ft - (4938 mm)
Perc LP * 180 %
Area * 403 ft²
Edit in Calculator

Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.

Comments

© 2025 Good Old Boat, Inc. All rights reserved