Catspaw Dinghy Storm Sail
Description
The catspaw dinghy storm sail is a sailboat designed by Joel White.
Custom sail calculations are not possible for this boat as no I, J, P and E dimensions are available.
The standard boat dimensions
| i | - |
|---|---|
| j | - |
| p | - |
| e | - |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| - | - | - | - | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | SPRIT |
|---|---|
| Luff | 7.35 ft - (2240 mm) |
| Foot | 7.35 ft - (2240 mm) |
| Leech | 10.12 ft - (3085 mm) |
| Head | * 81.55 ft - (24856 mm) |
| Diag (clew/throat) | 9.6 ft - (2926 mm) |
| Tack Angle | 5.1 ° |
| Area | * 50.88 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.