Cape Dory 330 Cutter Rig
Description
The Cape Dory 330 is a classic fiberglass sailboat designed by renowned naval architect Carl Alberg and built by Cape Dory Yachts in the United States. Produced from 1985 to 1988, only 27 units were constructed, making it a relatively rare model. It features a long (full) keel for stability and tracking, and a cutter rig configuration, which allows for versatile sail handling—ideal for offshore cruising or heavy-weather sailing. The 330 is essentially an updated version of the earlier Cape Dory 33, with refinements like a teak companionway ladder, increased water capacity (85 gallons vs. 74 in the 33), and a slightly larger sail area. It's known for its seaworthiness, traditional lines, and comfortable interior layout, including a V-berth forward, head with shower, and settees that convert to berths.
Construction Details
| Designer | Carl Alberg |
|---|---|
| Builder | Cape Dory Yachts |
| Length | 33.040 ft |
| LOA | 33.040 ft |
| LWL | 24.500 ft |
| Beam | 10.250 ft |
| Displacement | 13300 lb |
| Ballast | 5500 lb |
| Max Draft | 4.833 ft |
| Year Built | 1985 |
The standard boat dimensions
| i | 44.75 ft |
|---|---|
| j | 13.75 ft |
| p | 39 ft |
| e | 13 ft |
| p2 | - |
| e2 | - |
| i2 | - |
| j2 | - |
| I | J | P | E | P2 | E2 | I2 | J2 |
|---|---|---|---|---|---|---|---|
| 44.75 ft | 13.75 ft | 39 ft | 13 ft | - | - | - | - |
Documents
Sails
Cape Dory 330 Cutter Rig - MAINSAIL
| Luff | * 39 ft - (11887 mm) |
|---|---|
| Foot | * 13 ft - (3962 mm) |
| Leech | * 40.41 ft - (12317 mm) |
| Tack Angle | * 88 ° |
| Diagonal | * 40.68 ft - (12399 mm) |
| Head (inches) | * 6 in - (152 mm) |
| Area | * 261.88 ft² |
| Edit in Calculator | |
Cape Dory 330 Cutter Rig - JIBSAIL
| Luff | * 37.45 ft - (11415 mm) |
|---|---|
| Foot | * 18.09 ft - (5514 mm) |
| Leech | * 32.73 ft - (9976 mm) |
| Percentage LP | * 114.98 % |
| Length Perpendicular | * 15.81 ft - (4819 mm) |
| Deck Angle | * 12 ° |
| Area | * 296.04 ft² |
| Edit in Calculator | |
Cape Dory 330 Cutter Rig - GENOA
| Luff | * 44.47 ft - (13554 mm) |
|---|---|
| Foot | * 22.1 ft - (6736 mm) |
| Leech | * 41.94 ft - (12783 mm) |
| Percentage LP | * 149.96 % |
| Length Perpendicular | * 20.62 ft - (6285 mm) |
| Deck Angle | * 4 ° |
| Area | * 458.5 ft² |
| Edit in Calculator | |
Cape Dory 330 Cutter Rig - GENOA
| Luff | 43.5 ft - (13259 mm) |
|---|---|
| Foot | 20 ft - (6096 mm) |
| Leech | 40.5 ft - (12344 mm) |
| Percentage LP | * 134.84 % |
| Length Perpendicular | * 18.54 ft - (5651 mm) |
| Deck Angle | * 4.93 ° |
| Area | * 403.31 ft² |
| Edit in Calculator | |
Cape Dory 330 Cutter Rig - ASYMMETRICAL
| Luff | 45 ft - (13716 mm) |
|---|---|
| Foot | 23.5 ft - (7163 mm) |
| Leech | 42 ft - (12802 mm) |
| Perc LP | * 165 % |
| Area | * 793 ft² |
| Edit in Calculator | |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.