C&C 27 MK I I
Description
The C&C 27 MK II is a compact cruiser designed by Cuthbertson and Cassian. Mark II: Hulls 216 to 451 were produced from late 1972 to 1974. The Mark II hulls were the same as the Mark I's. Their sail area also remained the same, but they had a two-foot-taller, "higher-aspect" rig, and their standing rigging now had 3 side shrouds (two lowers and one upper). The aft-travelers, tillers, and Atomic 4 gas engines also remained the same.
Construction Details
| Designer | Cuthbertson and Cassian |
|---|---|
| Builder | C & C Yachts |
| Length | 27.330 ft |
| LOA | 27.330 ft |
| LWL | 21.000 ft |
| Beam | 9.920 ft |
| Displacement | 5500 lb |
| Max Draft | 4.500 ft |
The standard boat dimensions
| i | 37 ft |
|---|---|
| j | 10.08 ft |
| p | 31 ft |
| e | 9.50 ft |
| p2 | - |
| e2 | - |
| i2 | - |
| j2 | - |
| I | J | P | E | P2 | E2 | I2 | J2 |
|---|---|---|---|---|---|---|---|
| 37 ft | 10.08 ft | 31 ft | 9.50 ft | - | - | - | - |
Sails
C&C 27 MK I I - MAINSAIL
| Luff | * 29 ft - (8839 mm) |
|---|---|
| Foot | * 9.5 ft - (2896 mm) |
| Leech | * 29.89 ft - (9110 mm) |
| Tack Angle | * 88 ° |
| Diagonal | * 30.2 ft - (9205 mm) |
| Head (inches) | * 4.5 in - (114 mm) |
| Area | * 140.84 ft² |
| Edit in Calculator | |
C&C 27 MK I I - JIBSAIL
| Luff | 29.54 ft - (9004 mm) |
|---|---|
| Foot | * 15.69 ft - (4782 mm) |
| Leech | * 25.44 ft - (7754 mm) |
| Percentage LP | * 114.98 % |
| Length Perpendicular | * 13.51 ft - (4118 mm) |
| Deck Angle | * 12.02 ° |
| Area | * 199.51 ft² |
| Edit in Calculator | |
C&C 27 MK I I - GENOA
| Luff | 35.25 ft - (10744 mm) |
|---|---|
| Foot | 19 ft - (5791 mm) |
| Leech | 33.25 ft - (10135 mm) |
| Percentage LP | * 150.13 % |
| Length Perpendicular | * 17.64 ft - (5377 mm) |
| Deck Angle | * 3.27 ° |
| Area | * 310.87 ft² |
| Edit in Calculator | |
C&C 27 MK I I - ASYMMETRICAL
| Luff | * 35.07 ft - (10689 mm) |
|---|---|
| Foot | * 19.39 ft - (5910 mm) |
| Leech | * 32.26 ft - (9833 mm) |
| Perc LP | * 165 % |
| Area | * 510 ft² |
| Edit in Calculator | |
C&C 27 MK I I - SPINNAKER
| Stays | * 35.07 ft - (10689 mm) |
|---|---|
| MidGirth | * 21.15 ft - (6447 mm) |
| Foot | * 21.15 ft - (6447 mm) |
| Perc LP | * 180 % |
| Area | * 630 ft² |
| Edit in Calculator | |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.