Cal 33
Description
The Cal 33, designed by C. William "Bill" Lapworth and built by Jensen Marine/Cal Boats from 1971 to 1973, is an American cruiser-racer sailboat tailored for coastal cruising and club racing under PHRF (typical rating ~150-162). It blends performance, seaworthiness, and comfort for small families or couples, featuring a solid fiberglass hull, a fixed fin keel, and a spade rudder. Approximately 150-200 units were produced, reflecting its popularity during the early 1970s sailing boom.
Construction Details
Designer | C. William Lapworth |
---|---|
Length | 33.000 ft |
LOA | 32.670 ft |
LWL | 27.500 ft |
Beam | 10.330 ft |
Displacement | 10800 lb |
Max Draft | 6.000 ft |
The standard boat dimensions
i | 46 ft |
---|---|
j | 13.25 ft |
p | 40.50 ft |
e | 12.25 ft |
p2 | - |
e2 | - |
I | J | P | E | P2 | E2 |
---|---|---|---|---|---|
46 ft | 13.25 ft | 40.50 ft | 12.25 ft | - | - |
Sails
Sail Type | MAINSAIL |
---|---|
Luff | * 36.42 ft - (11101 mm) |
Foot | * 12.5 ft - (3810 mm) |
Leech | * 37.69 ft - (11488 mm) |
Tack Angle | * 88 ° |
Diagonal | * 38.09 ft - (11610 mm) |
Head (inches) | * 6 in - (152 mm) |
Area | * 233.17 ft² |
Sail Type | JIBSAIL |
---|---|
Luff | 36.94 ft - (11259 mm) |
Foot | * 18.53 ft - (5648 mm) |
Leech | * 32.1 ft - (9784 mm) |
Percentage LP | * 115 % |
Length Perpendicular | * 16.1 ft - (4907 mm) |
Deck Angle | * 12.01 ° |
Area | * 297.4 ft² |
Sail Type | GENOA |
---|---|
Luff | 43.86 ft - (13369 mm) |
Foot | * 22.59 ft - (6885 mm) |
Leech | * 41.28 ft - (12582 mm) |
Percentage LP | * 150 % |
Length Perpendicular | * 21 ft - (6401 mm) |
Deck Angle | * 3.97 ° |
Area | * 460.56 ft² |
Sail Type | ASYMMETRICAL |
---|---|
Luff | * 43.86 ft - (13369 mm) |
Foot | * 23.1 ft - (7041 mm) |
Leech | * 40.35 ft - (12299 mm) |
Perc LP | * 165 % |
Area | * 760 ft² |
Sail Type | SPINNAKER |
---|---|
Stays | * 43.86 ft - (13369 mm) |
MidGirth | * 25.2 ft - (7681 mm) |
Foot | * 25.2 ft - (7681 mm) |
Perc LP | * 180 % |
Area | * 939 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.