Cal 30

Description

The Cal 30 is an American cruiser-racer sailboat designed by William "Bill" Lapworth and built by Jensen Marine from 1966 to 1971. Part of the renowned Cal line, it was designed for coastal cruising and competitive club racing under PHRF (typical rating ~150-162), offering a blend of performance, seaworthiness, and moderate accommodations for small families or couples. The boat features a solid fiberglass hull, a fixed fin keel, and a spade rudder, making it responsive yet stable for coastal waters and occasional offshore passages. Approximately 400-500 units were built, and its robust construction and balanced design keep it popular in the used market,

Construction Details

Designer C. William Lapworth
Length 30.000 ft
LOA 30.000 ft
LWL 24.500 ft
Beam 10.000 ft
Displacement 9600 lb
Max Draft 4.500 ft
Request A Sail Quote

The standard boat dimensions

i 35 ft
j 12 ft
p 30 ft
e 14 ft
p2 -
e2 -

Blueprints

Sails

Sail Type MAINSAIL
Luff * 30 ft - (9144 mm)
Foot * 14 ft - (4267 mm)
Leech * 32.49 ft - (9903 mm)
Tack Angle * 88 °
Diagonal * 32.66 ft - (9955 mm)
Head (inches) * 6 in - (152 mm)
Area * 217.53 ft²
Sail Type JIBSAIL
Luff 29.6 ft - (9022 mm)
Foot * 16.09 ft - (4904 mm)
Leech * 25.4 ft - (7742 mm)
Percentage LP * 115 %
Length Perpendicular * 13.8 ft - (4206 mm)
Deck Angle * 12.03 °
Area * 204.22 ft²
Sail Type GENOA
Luff 35.15 ft - (10714 mm)
Foot * 19.54 ft - (5956 mm)
Leech * 32.91 ft - (10031 mm)
Percentage LP * 150 %
Length Perpendicular * 18 ft - (5486 mm)
Deck Angle * 3.96 °
Area * 316.38 ft²
Sail Type ASYMMETRICAL
Luff 36 ft - (10973 mm)
Foot 21 ft - (6401 mm)
Leech 33 ft - (10058 mm)
Perc LP * 165 %
Area * 567 ft²
Sail Type SPINNAKER
Stays * 35.15 ft - (10714 mm)
MidGirth * 21.6 ft - (6584 mm)
Foot * 21.6 ft - (6584 mm)
Perc LP * 180 %
Area * 645 ft²

Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.