Brandlmayr 36 Tri
Description
The BRANDLMAYR 36 TRI is a sailboat. Her generous sail plan delivers excellent light-air performance.
The standard boat dimensions
| i | 36.50 ft |
|---|---|
| j | 14.25 ft |
| p | 31.75 ft |
| e | 16.25 ft |
| p2 | - |
| e2 | - |
| i2 | - |
| j2 | - |
| I | J | P | E | P2 | E2 | I2 | J2 |
|---|---|---|---|---|---|---|---|
| 36.50 ft | 14.25 ft | 31.75 ft | 16.25 ft | - | - | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, P, and E)
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 31.75 ft - (9677 mm) |
| Foot | * 16.25 ft - (4953 mm) |
| Leech | * 34.93 ft - (10647 mm) |
| Tack Angle | * 88.01 ° |
| Diagonal | * 35.16 ft - (10717 mm) |
| Head (inches) | * 6 in - (152 mm) |
| Area | 257.64 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | * 31.35 ft - (9555 mm) |
| Foot | * 19.61 ft - (5977 mm) |
| Leech | * 26.3 ft - (8016 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 16.39 ft - (4996 mm) |
| Deck Angle | * 12 ° |
| Area | 256.81 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | * 37.22 ft - (11345 mm) |
| Foot | * 23.65 ft - (7209 mm) |
| Leech | * 34.52 ft - (10522 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 21.38 ft - (6517 mm) |
| Deck Angle | * 4 ° |
| Area | 397.83 ft² |
| Sail Type | SPINNAKER |
|---|---|
| Stays | * 37.22 ft - (11345 mm) |
| MidGirth | * 25.65 ft - (7818 mm) |
| Foot | * 25.65 ft - (7818 mm) |
| Perc LP | * 180 % |
| Area | 811.49 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.