Bolger Car Topper (Sprit Rig)
Description
The BOLGER CAR TOPPER (SPRIT RIG) is a sailboat designed by Bolger, Philip C..
Custom sail calculations are not possible for this boat as no I, J, P and E dimensions are available.
The standard boat dimensions
| i | - |
|---|---|
| j | - |
| p | - |
| e | - |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| - | - | - | - | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | SPRIT |
|---|---|
| Luff | 8 ft - (2438 mm) |
| Foot | 8.167 ft - (2489 mm) |
| Leech | 12.33 ft - (3758 mm) |
| Tack Angle | * 88.98 ° |
| Diag (clew/throat) | 11.33 ft - (3453 mm) |
| Head | 4.92 ft - (1500 mm) |
| Area | * 60.53 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.