Bill Burgess 3.6m Sailing Skiff
Description
660 Lbs Moulded Design, Clinker Construction Sailing Skiff with conventional thwarts and side benches.Lofted and built by Bill Burgess.
The standard boat dimensions
| i | 8.20 ft |
|---|---|
| j | 5.90 ft |
| p | 3.60 ft |
| e | 10 ft |
| p2 | - |
| e2 | - |
| i2 | - |
| j2 | - |
| I | J | P | E | P2 | E2 | I2 | J2 |
|---|---|---|---|---|---|---|---|
| 8.20 ft | 5.90 ft | 3.60 ft | 10 ft | - | - | - | - |
Sails
Bill Burgess 3.6m Sailing Skiff - JIBSAIL
| Luff | 8.2 ft - (2499 mm) |
|---|---|
| Foot | 5.9 ft - (1798 mm) |
| Leech | 9.51 ft - (2899 mm) |
| Percentage LP | * 99.32 % |
| Length Perpendicular | * 5.86 ft - (1786 mm) |
| Deck Angle | 59 ° |
| Area | * 24.02 ft² |
| Edit in Calculator | |
Bill Burgess 3.6m Sailing Skiff - GAFF MAIN
| Luff | 3.6 ft - (1097 mm) |
|---|---|
| Foot | 10 ft - (3048 mm) |
| Leech | 14.1 ft - (4298 mm) |
| Tack Angle | * 88 ° |
| Diag (clew/throat) | * 10.51 ft - (3203 mm) |
| Head | 9.51 ft - (2899 mm) |
| Area | * 67.96 ft² |
| Edit in Calculator | |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.