Beneteau Oceanis 350
Description
The Beneteau Oceanis 350 is a timeless aft-cockpit cruiser designed by Philippe Briand and built by Beneteau in France from 1986 to 1993. As an early standout in the Oceanis series, it was optimized for charter and family cruising, blending responsive sailing with generous interior volume for its era. Approximately 200 units were produced, many still active in coastal fleets worldwide. Its fin keel and spade rudder deliver balanced performance, while the wide beam enhances stability and space below. Variants include a shoal-draft wing keel (4.16 ft draft) for shallower anchorages.
Construction Details
| Designer | Philippe Briand |
|---|---|
| Builder | Beneteau |
| Length | 33.830 ft |
| LOA | 33.800 ft |
| LWL | 29.830 ft |
| Beam | 11.250 ft |
| Displacement | 10582 lb |
| Ballast | 3540 lb |
| Max Draft | 5.160 ft |
| Year Built | 1986 |
The standard boat dimensions
| i | 41.47 ft |
|---|---|
| j | 12.80 ft |
| p | 35.76 ft |
| e | 11.48 ft |
| p2 | - |
| e2 | - |
| i2 | - |
| j2 | - |
| I | J | P | E | P2 | E2 | I2 | J2 |
|---|---|---|---|---|---|---|---|
| 41.47 ft | 12.80 ft | 35.76 ft | 11.48 ft | - | - | - | - |
Sails
Beneteau Oceanis 350 - MAINSAIL
| Luff | * 35.76 ft - (10900 mm) |
|---|---|
| Foot | * 11.48 ft - (3499 mm) |
| Leech | * 36.81 ft - (11220 mm) |
| Tack Angle | * 87.98 ° |
| Diagonal | * 37.17 ft - (11329 mm) |
| Head (inches) | * 5.25 in - (133 mm) |
| Area | * 209.73 ft² |
| Edit in Calculator |
Beneteau Oceanis 350 - JIBSAIL
| Luff | 40.75 ft - (12421 mm) |
|---|---|
| Foot | 14.25 ft - (4343 mm) |
| Leech | 37 ft - (11278 mm) |
| Percentage LP | * 100.7 % |
| Length Perpendicular | * 12.89 ft - (3929 mm) |
| Deck Angle | * 8.05 ° |
| Area | * 262.69 ft² |
| Edit in Calculator |
Beneteau Oceanis 350 - JIBSAIL
| Luff | 34.72 ft - (10583 mm) |
|---|---|
| Foot | * 16.86 ft - (5139 mm) |
| Leech | * 30.31 ft - (9238 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 14.72 ft - (4487 mm) |
| Deck Angle | * 12.04 ° |
| Area | * 255.51 ft² |
| Edit in Calculator |
Beneteau Oceanis 350 - GENOA
| Luff | 40.25 ft - (12268 mm) |
|---|---|
| Foot | 19.25 ft - (5867 mm) |
| Leech | 38 ft - (11582 mm) |
| Percentage LP | * 140.7 % |
| Length Perpendicular | * 18.01 ft - (5489 mm) |
| Deck Angle | * 3.5 ° |
| Area | * 362.5 ft² |
| Edit in Calculator |
Beneteau Oceanis 350 - GENOA
| Luff | 40.75 ft - (12421 mm) |
|---|---|
| Foot | 20.5 ft - (6248 mm) |
| Leech | 38.75 ft - (11811 mm) |
| Percentage LP | * 150.23 % |
| Length Perpendicular | * 19.23 ft - (5861 mm) |
| Deck Angle | * 3.13 ° |
| Area | * 391.78 ft² |
| Edit in Calculator |
Beneteau Oceanis 350 - ASYMMETRICAL
| Luff | 42 ft - (12802 mm) |
|---|---|
| Foot | 22 ft - (6706 mm) |
| Leech | 39 ft - (11887 mm) |
| Perc LP | * 165 % |
| Area | * 693 ft² |
| Edit in Calculator |
Beneteau Oceanis 350 - SPINNAKER
| Stays | * 41.23 ft - (12567 mm) |
|---|---|
| MidGirth | * 23.04 ft - (7023 mm) |
| Foot | * 23.04 ft - (7023 mm) |
| Perc LP | * 180 % |
| Area | * 807 ft² |
| Edit in Calculator |
Beneteau Oceanis 350 - STORMJIB
| Luff | * 23.87 ft - (7276 mm) |
|---|---|
| Foot | * 9.51 ft - (2899 mm) |
| Leech | * 19.81 ft - (6038 mm) |
| Perc LP | * 60 % |
| Length Perp | * 7.68 ft - (2341 mm) |
| Deck Angle | * 18.99 ° |
| Area | * 91.66 ft² |
| Edit in Calculator |
Beneteau Oceanis 350 - STORMTRYSAIL
| Luff | * 13.11 ft - (3996 mm) |
|---|---|
| Foot | * 12.05 ft - (3673 mm) |
| Leech | * 10.92 ft - (3328 mm) |
| Length Perp | * 10.92 ft - (3328 mm) |
| Tack Angle | * -25 ° |
| Area | * 62 ft² |
| Edit in Calculator |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.
Comments
