Beneteau Oceanis 311 Clipper
Description
The Beneteau Oceanis 311 Clipper is a sailboat. Her generous sail plan delivers excellent light-air performance.
Construction Details
| Designer | Unknown |
|---|---|
| Length | 32.250 ft |
The standard boat dimensions
| i | 40.35 ft |
|---|---|
| j | 11.35 ft |
| p | 36.61 ft |
| e | 13.19 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 40.35 ft | 11.35 ft | 36.61 ft | 13.19 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 36.61 ft - (11159 mm) |
| Foot | * 13.19 ft - (4020 mm) |
| Leech-AftHdBd | * 38.2 ft - (11643 mm) |
| Tack Ang | * 88 ° |
| Diag (clew/head) | * 38.48 ft - (11729 mm) |
| Head (inches) | * 6 in |
| Area (no Roach) | * 249.24 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | * 33.53 ft - (10220 mm) |
| Foot | * 14.74 ft - (4493 mm) |
| Leech | * 29.7 ft - (9053 mm) |
| Percentage LP | * 114.98 % |
| Length Perpendicular | * 13.05 ft - (3978 mm) |
| Deck Angle | * 11.99 ° |
| Area | * 218.8 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | * 39.82 ft - (12137 mm) |
| Foot | * 18.08 ft - (5511 mm) |
| Leech | * 37.77 ft - (11512 mm) |
| Percentage LP | * 149.96 % |
| Length Perpendicular | * 17.02 ft - (5188 mm) |
| Deck Angle | * 4.01 ° |
| Area | * 338.85 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | 39 ft - (11887 mm) |
| Foot | 15.75 ft - (4801 mm) |
| Leech | 36.75 ft - (11201 mm) |
| Percentage LP | * 130.48 % |
| Length Perpendicular | * 14.81 ft - (4514 mm) |
| Deck Angle | * 4.21 ° |
| Area | * 288.75 ft² |
| Sail Type | ASYMMETRICAL |
|---|---|
| Luff | 40.25 ft - (12268 mm) |
| Foot | 19 ft - (5791 mm) |
| Leech | 37 ft - (11278 mm) |
| Perc LP | * 165 |
| Area | * 574 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.