Beneteau First Ims 407
Description
The BENETEAU FIRST IMS 407 is a sailboat designed by Beneteau Yachts. Her generous sail plan delivers excellent light-air performance.
The standard boat dimensions
| i | 50.79 ft |
|---|---|
| j | 14.70 ft |
| p | 52.69 ft |
| e | 19.09 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 50.79 ft | 14.70 ft | 52.69 ft | 19.09 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | MAINSAIL |
|---|---|
| 23 | * 52.69 |
| 10 | * 19.09 |
| 24.55 | * 55.03 |
| 88 | * 87.99 |
| 24.76 | * 55.41 |
| 4.5 | * 6 |
| 118.76 | * 511.59 |
| Sail Type | JIBSAIL |
|---|---|
| Luff | 42.3 ft - (12893 mm) |
| Foot | * 19.17 ft - (5843 mm) |
| Leech | * 37.3 ft - (11369 mm) |
| Percentage LP | * 114.97 % |
| Length Perpendicular | * 16.9 ft - (5151 mm) |
| Deck Angle | * 12.02 ° |
| Area | * 357.44 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | 50.23 ft - (15310 mm) |
| Foot | * 23.49 ft - (7160 mm) |
| Leech | * 47.55 ft - (14493 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 22.05 ft - (6721 mm) |
| Deck Angle | * 4.03 ° |
| Area | * 553.76 ft² |
| Sail Type | ASYMMETRICAL |
|---|---|
| Luff | * 50.23 ft - (15310 mm) |
| Foot | * 24.26 ft - (7394 mm) |
| Leech | * 46.21 ft - (14085 mm) |
| Perc LP | * 165 % |
| Area | * 914 ft² |
| Sail Type | SPINNAKER |
|---|---|
| Stays | * 50.23 ft - (15310 mm) |
| MidGirth | * 26.46 ft - (8065 mm) |
| Foot | * 26.46 ft - (8065 mm) |
| Perc LP | * 180 % |
| Area | * 1130 ft² |
| Sail Type | STORMJIB |
|---|---|
| Luff | * 29.08 ft - (8864 mm) |
| Foot | * 10.79 ft - (3289 mm) |
| Leech | * 24.51 ft - (7471 mm) |
| Perc LP | * 60 % |
| Length Perp | * 8.82 ft - (2688 mm) |
| Deck Angle | * 19.01 ° |
| Area | * 128.27 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.