Beneteau First 310 Racing Rig
Description
The Beneteau FIRST 310 RACING RIG is a sailboat designed by Beneteau Yachts. Her generous sail plan delivers excellent light-air performance.
The standard boat dimensions
| i | 40.09 ft |
|---|---|
| j | 10.83 ft |
| p | 41.34 ft |
| e | 12.96 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 40.09 ft | 10.83 ft | 41.34 ft | 12.96 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | MAINSAIL |
|---|---|
| 23 | * 41.34 |
| 10 | * 12.96 |
| 24.55 | * 42.47 |
| 88 | * 88 |
| 24.76 | * 42.89 |
| 4.5 | * 6 |
| 118.76 | * 273.51 |
| Sail Type | JIBSAIL |
|---|---|
| Luff | 33.22 ft - (10125 mm) |
| Foot | * 13.99 ft - (4264 mm) |
| Leech | * 29.59 ft - (9019 mm) |
| Percentage LP | * 114.96 % |
| Length Perpendicular | * 12.45 ft - (3795 mm) |
| Deck Angle | * 12 ° |
| Area | * 206.82 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | 39.45 ft - (12024 mm) |
| Foot | * 17.19 ft - (5240 mm) |
| Leech | * 37.51 ft - (11433 mm) |
| Percentage LP | * 149.95 % |
| Length Perpendicular | * 16.24 ft - (4950 mm) |
| Deck Angle | * 4.03 ° |
| Area | * 320.32 ft² |
| Sail Type | ASYMMETRICAL |
|---|---|
| Luff | * 39.45 ft - (12024 mm) |
| Foot | * 17.87 ft - (5447 mm) |
| Leech | * 36.29 ft - (11061 mm) |
| Perc LP | * 165 % |
| Area | * 529 ft² |
| Sail Type | SPINNAKER |
|---|---|
| Stays | * 39.45 ft - (12024 mm) |
| MidGirth | * 19.49 ft - (5941 mm) |
| Foot | * 19.49 ft - (5941 mm) |
| Perc LP | * 180 % |
| Area | * 654 ft² |
| Sail Type | STORMJIB |
|---|---|
| Luff | * 22.84 ft - (6962 mm) |
| Foot | * 7.85 ft - (2393 mm) |
| Leech | * 19.55 ft - (5959 mm) |
| Perc LP | * 60.02 % |
| Length Perp | * 6.5 ft - (1981 mm) |
| Deck Angle | * 18.99 ° |
| Area | * 74.23 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.