Bavaria 430

Description

The Bavaria 430 (also commonly known as the Bavaria 430 Atlantic, Lagoon, or Caribic in variants) is a large family cruising sailboat produced by Bavaria Yachts in Germany primarily in the early 1990s (around 1990–1993, with some builds into the mid-1990s). Designed by Judel/Vrolijk & Co. (the renowned German naval architecture firm of Rolf Vrolijk and others, known for performance-oriented yet practical production cruisers), it was built in limited production quantities—estimated in the low hundreds (likely 100–300 units total across variants, though exact numbers are not publicly detailed by Bavaria, typical for their early-1990s models). This places it as a rarer classic compared to Bavaria's higher-volume later lines, appreciated today for its solid construction, spacious accommodations, and balanced performance suited to coastal, Mediterranean, or extended cruising.

Construction Details

Designer Judel/Vrolijk & Co.
Builder Baltic Yachts
Length 43.900 ft
LOA 43.900 ft
LWL 34.780 ft
Beam 13.000 ft
Displacement 22000 lb
Ballast 7300 lb
Max Draft 6.400 ft
Year Built 1990
Request A Sail Quote

The standard boat dimensions

i 53.32 ft
j 14.50 ft
p 46.26 ft
e 16.73 ft
p2 -
e2 -
i2 -
j2 -

Sails

Bavaria 430 - MAINSAIL

Luff * 46.26 ft - (14100 mm)
Foot * 16.73 ft - (5099 mm)
Leech * 48.26 ft - (14710 mm)
Tack Angle * 88 °
Diagonal * 48.64 ft - (14825 mm)
Head (inches) * 6 in - (152 mm)
Area * 394.6 ft²
Edit in Calculator

Bavaria 430 - JIBSAIL

Luff 44.21 ft - (13475 mm)
Foot * 18.76 ft - (5718 mm)
Leech * 39.34 ft - (11991 mm)
Percentage LP * 115.03 %
Length Perpendicular * 16.68 ft - (5084 mm)
Deck Angle * 12.01 °
Area * 368.75 ft²
Edit in Calculator

Bavaria 430 - GENOA

Luff 52.49 ft - (15999 mm)
Foot * 23.03 ft - (7020 mm)
Leech * 49.91 ft - (15213 mm)
Percentage LP * 150 %
Length Perpendicular * 21.75 ft - (6629 mm)
Deck Angle * 3.97 °
Area * 570.85 ft²
Edit in Calculator

Bavaria 430 - SPINNAKER

Stays * 52.49 ft - (15999 mm)
MidGirth * 26.1 ft - (7955 mm)
Foot * 26.1 ft - (7955 mm)
Perc LP * 180 %
Area * 1164 ft²
Edit in Calculator

Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.

Comments