Seawind 30 by Allied
Description
The Seawind 30 was designed by Thomas Gillmer and built by Allied Boat Co. It is a heavy full keel masthead sloop built from 1962 to 1982 with approximately 161 hulls produced. The sloop rig was not as popular as the ketch version and is relatively rare.
Construction Details
| Designer | Thomas Gillmer |
|---|---|
| Builder | Allied Boat Co (USA) |
| Length | 30.000 ft |
| LOA | 30.500 ft |
| LWL | 24.000 ft |
| Beam | 9.250 ft |
| Displacement | 12000 lb |
| Ballast | 4200 lb |
| Max Draft | 4.200 ft |
| Year Built | 1962 |
The standard boat dimensions
| i | 35.58 ft |
|---|---|
| j | 13.16 ft |
| p | 31.83 ft |
| e | 14.25 ft |
| p2 | - |
| e2 | - |
| i2 | - |
| j2 | - |
| I | J | P | E | P2 | E2 | I2 | J2 |
|---|---|---|---|---|---|---|---|
| 35.58 ft | 13.16 ft | 31.83 ft | 14.25 ft | - | - | - | - |
Sails
Seawind 30 by Allied - MAINSAIL
| Luff | * 31.83 ft - (9702 mm) |
|---|---|
| Foot | * 14.25 ft - (4343 mm) |
| Leech | * 34.26 ft - (10442 mm) |
| Tack Angle | * 88 ° |
| Diagonal | * 34.42 ft - (10491 mm) |
| Head (inches) | * 4.5 in - (114 mm) |
| Area | * 232.525 ft² |
| Edit in Calculator |
Seawind 30 by Allied - JIBSAIL
| Luff | * 30.35 ft - (9251 mm) |
|---|---|
| Foot | * 17.9 ft - (5456 mm) |
| Leech | * 25.71 ft - (7836 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 15.13 ft - (4612 mm) |
| Deck Angle | * 12 ° |
| Area | * 229.61 ft² |
| Edit in Calculator |
Seawind 30 by Allied - GENOA
| Luff | * 36.04 ft - (10985 mm) |
|---|---|
| Foot | * 21.66 ft - (6602 mm) |
| Leech | * 33.55 ft - (10226 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 19.74 ft - (6017 mm) |
| Deck Angle | * 4 ° |
| Area | * 355.74 ft² |
| Edit in Calculator |
Seawind 30 by Allied - ASYMMETRICAL
| Luff | * 36.04 ft - (10985 mm) |
|---|---|
| Foot | * 21.71 ft - (6617 mm) |
| Leech | * 33.16 ft - (10107 mm) |
| Perc LP | * 165 % |
| Area | * 586.82 ft² |
| Edit in Calculator |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.