Seawind 30 Ketch by Allied
Description
The Seawind 30 Ketch was designed by Thomas Gillmer and built by Allied Boat Co. It is a heavy full keel masthead ketch built from 1962 to 1982 with approximately 161 hulls produced.
Construction Details
| Designer | Thomas Gillmer |
|---|---|
| Builder | Allied Boat Co (USA) |
| Length | 30.000 ft |
| LOA | 30.500 ft |
| LWL | 24.000 ft |
| Beam | 9.250 ft |
| Displacement | 12000 lb |
| Ballast | 4200 lb |
| Max Draft | 4.200 ft |
| Year Built | 1962 |
The standard boat dimensions
| i | 35.50 ft |
|---|---|
| j | 12.25 ft |
| p | 31.50 ft |
| e | 13 ft |
| p2 | 18.16 ft |
| e2 | 8.50 ft |
| i2 | - |
| j2 | - |
| I | J | P | E | P2 | E2 | I2 | J2 |
|---|---|---|---|---|---|---|---|
| 35.50 ft | 12.25 ft | 31.50 ft | 13 ft | 18.16 ft | 8.50 ft | - | - |
Sails
Seawind 30 Ketch by Allied - MAINSAIL
| Luff | * 31.5 ft - (9601 mm) |
|---|---|
| Foot | * 13 ft - (3962 mm) |
| Leech | * 33.37 ft - (10171 mm) |
| Tack Angle | * 88.02 ° |
| Diagonal | * 33.66 ft - (10260 mm) |
| Head (inches) | * 6 in - (152 mm) |
| Area | * 211.46 ft² |
| Edit in Calculator |
Seawind 30 Ketch by Allied - JIBSAIL
| Luff | * 30.04 ft - (9156 mm) |
|---|---|
| Foot | * 16.44 ft - (5011 mm) |
| Leech | * 25.76 ft - (7852 mm) |
| Percentage LP | * 115.02 % |
| Length Perpendicular | * 14.09 ft - (4295 mm) |
| Deck Angle | * 11.99 ° |
| Area | * 211.6 ft² |
| Edit in Calculator |
Seawind 30 Ketch by Allied - GENOA
| Luff | * 35.68 ft - (10875 mm) |
|---|---|
| Foot | * 19.97 ft - (6087 mm) |
| Leech | * 33.39 ft - (10177 mm) |
| Percentage LP | * 150.04 % |
| Length Perpendicular | * 18.38 ft - (5602 mm) |
| Deck Angle | * 3.97 ° |
| Area | * 327.93 ft² |
| Edit in Calculator |
Seawind 30 Ketch by Allied - ASYMMETRICAL
| Luff | 36 ft - (10973 mm) |
|---|---|
| Foot | 21 ft - (6401 mm) |
| Leech | 34 ft - (10363 mm) |
| Perc LP | * 165 % |
| Area | * 567 ft² |
| Edit in Calculator |
Seawind 30 Ketch by Allied - MIZZEN
| Luff | * 18.16 ft - (5535 mm) |
|---|---|
| Foot | * 8.5 ft - (2591 mm) |
| Leech-AftHdBd | * 19.78 ft - (6029 mm) |
| Tack Ang | * 88 ° |
| Diag (clew/head) | * 19.78 ft - (6029 mm) |
| Head (inches) | * 3.5 in - (89 mm) |
| Area (no Roach) | * 79.441 ft² |
| Edit in Calculator |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.